T. F. Abdelzaher, E. M. Arkins, and K. G. Shin, QoS negotiation in real-time systems and its application to automated flight control, Proceedings Third IEEE Real-Time Technology and Applications Symposium, 1997.
DOI : 10.1109/RTTAS.1997.601361

M. Alden and F. Crusca, Quadratic cost function design for linear optimal control systems, TENCON'92, Technology Enabling Tomorrow, 1992.
DOI : 10.1109/TENCON.1992.271828

P. Andrianiaina, A. Seuret, and D. Simon, Robust control under weakened real-time constraints, IEEE Conference on Decision and Control and European Control Conference, 2011.
DOI : 10.1109/CDC.2011.6161104
URL : https://hal.archives-ouvertes.fr/hal-00640403

K. Årzén, A. Cervin, J. Eker, and L. Sha, An introduction to control and scheduling co-design, Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187), 2000.
DOI : 10.1109/CDC.2001.914701

M. B. Gaïd, D. Simon, and O. Sename, A Design Methodology for Weakly-Hard Real-Time Control, 17th IFAC World Congress, 2008.
DOI : 10.3182/20080706-5-KR-1001.01736

G. Bernat, A. Burns, and A. Llamosí, Weakly hard real-time systems, IEEE Transactions on Computers, vol.50, issue.4, pp.308-321, 2001.
DOI : 10.1109/12.919277

G. Bernat, A. Colin, and S. Petters, WCET analysis of probabilistic hard real-time systems, 23rd IEEE Real-Time Systems Symposium, 2002. RTSS 2002., 2002.
DOI : 10.1109/REAL.2002.1181582

D. Bertrand, S. Faucou, and Y. Trinquet, An analysis of the AUTOSAR OS timing protection mechanism, 2009 IEEE Conference on Emerging Technologies & Factory Automation, 2009.
DOI : 10.1109/ETFA.2009.5347159

C. Burguière, . Ch, and . Rochange, History-based schemes and implicit path enumeration, 6th Intl. Workshop on Worst-Case Execution Time (WCET) Analysis, 2006.

G. Buttazzo and A. Cervin, Comparative assessment and evaluation of jitter control methods, Proc. 15th International Conference on Real-Time and Network Systems, 2007.

A. Cervin, Using Jitterbug to derive control loop timing requirements, CERTS'03 ? Co-Design of Embedded Real-Time Systems Workshop, 2003.

A. Cervin, Towards the integration of control and real-time scheduling design, 2000.

A. Cervin and B. Lincoln, Jitterbug 1.1?Reference manual, 2003.

A. Cervin, J. Eker, B. Bernhardsson, and K. Årzén, Feedback-feedforward scheduling of control tasks. Real-Time Systems, pp.25-53, 2002.

A. Cervin, B. Lincoln, J. Eker, K. Årzén, and G. Buttazzo, The jitter margin and its application in the design of real-time control systems, 10th International Conference on Real-Time and Embedded Computing Systems and Applications, 2004.

A. Cervin, K. Årzén, D. Henriksson, M. Lluesma-camps, P. Balbastre et al., Control loop timing analysis using TrueTime and Jitterbug, IEEE Computer Aided Control Systems Design Symposium, 2006.

A. Cervin, ANALYSIS OF OVERRUN STRATEGIES IN PERIODIC CONTROL TASKS, Proc. 16th IFAC World Congress, 2005.
DOI : 10.3182/20050703-6-CZ-1902.01076

J. Deverge and I. Puaut, Safe measurement-based wcet estimation, 5th International Workshop on worst-case execution time analysis, 2005.

R. Dorf, M. Farren, and C. Phillips, Adaptive sampling frequency for sampled-data control systems, IRE Transactions on Automatic Control, vol.7, issue.1, pp.38-47, 1962.
DOI : 10.1109/TAC.1962.1105415

J. Eker, P. Hagander, and K. Årzén, A feedback scheduler for real-time controller tasks, Control Engineering Practice, vol.8, issue.12, pp.1369-1378, 2000.
DOI : 10.1016/S0967-0661(00)00086-1

. Ph, A. Goupil, and . Marcos, Fault Tolerant Flight Control, chapter ch Number 399 in LNCIS, Industrial Review, vol.19, pp.521-536, 2010.

A. Hamann, R. Racu, and R. Ernst, A formal approach to robustness maximization of complex heterogeneous embedded systems, Proceedings of the 4th international conference on Hardware/software codesign and system synthesis , CODES+ISSS '06, 2006.
DOI : 10.1145/1176254.1176267

T. Henzinger and J. Sifakis, The Embedded Systems Design Challenge, 14th International Symposium on Formal Methods (FM), number 4085, 2006.
DOI : 10.1007/11813040_1

T. C. Hsia, Comparisons of adaptive sampling control laws, IEEE Transactions on Automatic Control, vol.17, issue.6, pp.830-831, 1972.
DOI : 10.1109/TAC.1972.1100168

T. C. Hsia, Analytic design of adaptive sampling control law in sampled-data systems, IEEE Transactions on Automatic Control, vol.19, issue.1, pp.39-42, 1974.
DOI : 10.1109/TAC.1974.1100455

R. Kirner and P. Puschner, Classification of WCET Analysis Techniques, Eighth IEEE International Symposium on Object-Oriented Real-Time Distributed Computing (ISORC'05), pp.190-199, 2005.
DOI : 10.1109/ISORC.2005.19

R. Kirner, R. Lang, P. Puschner, and C. Temple, Integrating WCET analysis into a Matlab/Simulink simulation model, 16th IFAC Workshop on Distributed Computer Control Systems, 2000.

B. Lisper, Fully automatic, parametric worst-case execution time analysis, Workshop on Worst-Case Execution Time (WCET) Analysis, pp.3-0531, 2003.

S. Louise, Calcul de majorants sûrs de temps d'exécution au pire pour des tâches d'application Temps-réel critique pour des sytèmes disposant de caches mémoire, 2002.

P. Puschner and M. Schoeberl, On composable system timing, task timing, and WCET analysis, 8th International Workshop on Worst-Case Execution Time (WCET) Analysis, 2008.

D. Robert, O. Sename, and D. Simon, An <formula formulatype="inline"><tex Notation="TeX">$H_{\infty} $</tex></formula> LPV Design for Sampling Varying Controllers: Experimentation With a T-Inverted Pendulum, IEEE Transactions on Control Systems Technology, vol.18, issue.3, pp.741-749, 2010.
DOI : 10.1109/TCST.2009.2026179

D. Seto, J. Lehoczky, L. Sha, and K. Shin, On task schedulability in realtime control systems. 17 th IEEE Realtime Systems Symposium, 1996.

A. Seuret, Stability analysis of networked control systems with asynchronous sampling and input delay, Proceedings of the 2011 American Control Conference, p.6, 2011.
DOI : 10.1109/ACC.2011.5990854
URL : https://hal.archives-ouvertes.fr/hal-00578771

L. Sha, T. Abdelzaher, K. Årzén, A. Cervin, T. Baker et al., Real Time Scheduling Theory: A Historical Perspective, Real-Time Systems, vol.28, issue.2/3, pp.2-3101, 2004.
DOI : 10.1023/B:TIME.0000045315.61234.1e

K. Shin and H. Kim, Derivation and application of hard deadlines for realtime control systems, IEEE Trans. on Systems, Man and Cybernetics, vol.22, issue.6, 1992.

K. Shin, C. M. Krishna, and Y. Lee, A unified method for evaluating realtime computer controllers and its application, IEEE Trans. on Automatic Control, vol.30, issue.4, 1985.

K. G. Shin and C. L. Meissner, Adaptation and graceful degradation of control system performance by task reallocation and period adjustment, Proceedings of 11th Euromicro Conference on Real-Time Systems. Euromicro RTS'99, 1999.
DOI : 10.1109/EMRTS.1999.777447

D. Simon, A. Seuret, P. Hokayem, J. Lygeros, and E. Camacho, State of the art in control/computing co-design, 2009.
URL : https://hal.archives-ouvertes.fr/inria-00536676

M. J. Smith, An evaluation of adaptive sampling, IEEE Transactions on Automatic Control, vol.16, issue.3, pp.282-284, 1971.
DOI : 10.1109/TAC.1971.1099722

J. Souyris, E. Le-pavec, G. Himbert, V. Jégu, and G. Borios, Computing the worst case execution time of an avionics program by abstract interpretation, 5th Intl. Workshop on Worst-Case Execution Time (WCET) Analysis, pp.21-24, 2005.

F. Xia and Y. Sun, Control-scheduling codesign: A perspective on integrating control and computing. Dynamics of Continuous, Discrete and Impulsive Systems -Series B, Special Issue on ICSCA 06, Inria RESEARCH CENTRE GRENOBLE ? RHÔNE-ALPES Inovallée 655 avenue de l'Europe Montbonnot 38334 Saint Ismier Cedex Publisher Inria Domaine de Voluceau -Rocquencourt BP 105 -78153 Le Chesnay Cedex inria.fr ISSN, pp.1352-1358, 2006.