M. Damak, J. Grosbois, and P. Smet, Vision robot based absolute accuracy measurement, calibration and uncertainty, The 35th International Symposium on Robotics, 2004.

H. Chen, T. Fuhlbrigge, S. Choi, J. Wang, and X. Li, Practical industrial robot zero offset calibration, 4th IEEE Conference on Automation Science and Engineering, pp.516-521, 2008.

A. Elatta, G. Li-pei, Z. F. Liang, D. Yu, and L. Fei, An overview of robot calibration, Information Technology Journal, pp.74-68, 2004.

C. Gong, J. Yuan, and J. Ni, Nongeometric error identification and compensation for robotic system by inverse calibration, International Journal of Machine Tools and Manufacture, vol.40, issue.14, pp.2119-2137, 2000.
DOI : 10.1016/S0890-6955(00)00023-7

E. Abele, M. Weigold, and S. Rothenbcher, Modeling and Identification of an Industrial Robot for Machining Applications, CIRP Annals - Manufacturing Technology, vol.56, issue.1, pp.387-390, 2007.
DOI : 10.1016/j.cirp.2007.05.090

P. Lambrechts, M. Boerlage, and M. Steinbuch, Trajectory planning and feedforward design for electromechanical motion systems, Control Engineering Practice, vol.13, issue.2, pp.145-157, 2005.
DOI : 10.1016/j.conengprac.2004.02.010

W. B. Hakvoort, R. G. Aarts, J. Van-dijk, and J. B. Jonker, Lifted system iterative learning control applied to an industrial robot, Control Engineering Practice, vol.16, issue.4, pp.377-391, 2008.
DOI : 10.1016/j.conengprac.2007.05.002

E. Abele, S. Bauer, S. Rothenbucher, M. Stelzer, and O. Stryk, Prediction of the tool displacement by coupled models of the compliant industrial robot and the milling process, Proceedings of the International Conference on Process Machine Interactions, pp.223-230, 2008.

E. Abele, J. Bauer, M. Pischan, O. V. Stryk, M. Friedmann et al., Prediction of the tool displacement for robot milling applications using co-simulation of an industrial robot and a removal process, CIRP 2nd International Conference Process Machine Interactions . CIRP, 2010.

J. Wang, H. Zhang, and T. Fuhlbrigge, Improving machining accuracy with robot deformation compensation, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.3826-3831, 2009.
DOI : 10.1109/IROS.2009.5353988

A. Olabi, R. Bearee, E. Nyiri, and O. Gibaru, Enhanced trajectory planning for machining with industrial six-axis robots, 2010 IEEE International Conference on Industrial Technology, pp.500-506, 2010.
DOI : 10.1109/ICIT.2010.5472749

URL : https://hal.archives-ouvertes.fr/hal-00777390

A. Olabi, R. Bare, O. Gibaru, and M. Damak, Feedrate planning for machining with industrial six-axis robots, Control Engineering Practice, vol.18, issue.5, pp.471-482, 2010.
DOI : 10.1016/j.conengprac.2010.01.004

URL : https://hal.archives-ouvertes.fr/hal-00992192

G. Alici and B. Shirinzadeh, Enhanced stiffness modeling, identification and characterization for robot manipulators, IEEE Transactions on Robotics, vol.21, issue.4, pp.554-564, 2005.
DOI : 10.1109/TRO.2004.842347

D. Tuttle, Understanding and modeling the behavior of a harmonic drive gear transmission, 1992.

T. Wongratanaphisan and M. Chew, Gravity compensation of spatial two-DOF serial manipulators, Journal of Robotic Systems, vol.26, issue.7, pp.329-347, 2002.
DOI : 10.1002/rob.10044

F. H. Ghorbel, P. S. Gandhi, and F. Alpeter, On the Kinematic Error in Harmonic Drive Gears, Journal of Mechanical Design, vol.123, issue.1, pp.90-97, 2001.
DOI : 10.1115/1.1334379