F. Chang, Introduction to health monitoring: context, problems, solutions. Presentation at the 1 st European Pre-workshop on Structural Health Monitoring, 2002.

Y. Caron and Y. Richard, CF-188 Fatigue Life Management Program, NATO publication RTO- MP-7, AC, vol.323, issue.4, 1998.

Z. Su and L. Ye, Identification of Damage Using Lamb Waves, From Fundamentals to Applications, 2009.

H. Lamb, On Waves in an Elastic Plate, Proc. R. Soc. Lond. A, pp.93-114, 1917.
DOI : 10.1098/rspa.1917.0008

L. Wang and F. G. Yuan, Group velocity and characteristic wave curves of Lamb waves in composites: Modeling and experiments, Composites Science and Technology, vol.67, issue.7-8, pp.1370-1384, 2007.
DOI : 10.1016/j.compscitech.2006.09.023

Y. Liu and J. Huang, Dispersion relations and modes of wave propagation in inclusion-reinforced composite plates, Composites Part B: Engineering, vol.43, issue.3, pp.1649-1657
DOI : 10.1016/j.compositesb.2012.01.018

N. Quaegebeur, P. Micheau, P. Masson, and M. Castaings, Methodology for optimal configuration in structural health monitoring of composite bonded joints, Smart Materials and Structures, vol.21, issue.10, p.2012
DOI : 10.1088/0964-1726/21/10/105001

S. Yashiro, S. Takatsubo, J. Toyama, and N. , An NDT technique for composite structures using visualized Lamb-wave propagation, Composites Science and Technology, vol.67, issue.15-16, pp.3202-3208, 2007.
DOI : 10.1016/j.compscitech.2007.04.006

Z. Su, C. Yang, N. Pan, L. Ye, and L. Zhou, Assessment of delamination in composite beams using shear horizontal (SH) wave mode, Composites Science and Technology, vol.67, issue.2, pp.244-251, 2007.
DOI : 10.1016/j.compscitech.2006.08.019

H. Sohn, D. Dutta, J. Y. Yang, H. J. Park, M. Desimio et al., Delamination detection in composites through guided wave field image processing, Composites Science and Technology, vol.71, issue.9, pp.1250-1256, 2011.
DOI : 10.1016/j.compscitech.2011.04.011

R. Watkins and R. Jha, A modified time reversal method for Lamb wave based diagnostics of composite structures, Mechanical Systems and Signal Processing, vol.31, pp.345-354
DOI : 10.1016/j.ymssp.2012.03.007

S. S. Kessler, S. M. Spearing, and C. Soutis, Damage detection in composite materials using Lamb wave methods, Smart Materials and Structures, vol.11, issue.2, pp.269-278, 2002.
DOI : 10.1088/0964-1726/11/2/310

A. A. Fahim, R. Gallego, N. Bochud, and G. Rus, Model-based damage reconstruction in composites from ultrasound transmission, Composites Part B: Engineering, vol.45, issue.1, pp.50-62, 2013.
DOI : 10.1016/j.compositesb.2012.09.003

N. Toyama and J. Takatsubo, Lamb wave method for quick inspection of impact-induced delamination in composite laminates, Composites Science and Technology, vol.64, issue.9, pp.1293-1300, 2004.
DOI : 10.1016/j.compscitech.2003.10.011

N. Toyama, J. Noda, and T. Okabe, Quantitative damage detection in cross-ply laminates using Lamb wave method, Composites Science and Technology, vol.63, issue.10, pp.1473-1479, 2003.
DOI : 10.1016/S0266-3538(03)00163-5

M. D. Sealea, B. T. Smith, and W. H. Prosser, Lamb wave assessment of fatigue and thermal damage in composites, The Journal of the Acoustical Society of America, vol.103, issue.5, pp.2416-2424, 1998.
DOI : 10.1121/1.422761

D. Qing-tian and Y. Zhi-chun, Propagation of guided waves in bonded composite structures with tapered adhesive layer, Applied Mathematical Modelling, vol.35, pp.5369-5381, 2011.

F. Habib, M. Martinez, A. Artemev, and M. Brothers, Structural health monitoring of bonded composite repairs ??? A critical comparison between ultrasonic Lamb wave approach and surface mounted crack sensor approach, Composites Part B: Engineering, vol.47, pp.26-34, 2013.
DOI : 10.1016/j.compositesb.2012.11.002

N. D. Alleyne and P. Cawley, A 2-dimensional Fourier transform method for the quantitative measurement of Lamb modes, IEEE Symposium on Ultrasonics, pp.1143-1146, 1990.
DOI : 10.1109/ULTSYM.1990.171541