J. Decotignie and P. Pleinevaux, A Survey on Industrial Communication Networks, Annales Des Télécommunications, vol.48, issue.9-10, pp.435-448, 1993.

P. Gaj, J. Jasperneite, and M. Felser, Computer Communication Within Industrial Distributed Environment???a Survey, IEEE Transactions on Industrial Informatics, vol.9, issue.1, pp.182-189, 2013.
DOI : 10.1109/TII.2012.2209668

K. Pister and L. Doherty, TSMP: Time Synchronized Mesh Protocol, International Symposium on Distributed Sensor Networks (DSN), pp.391-398, 2008.

M. R. Palattella, P. Thubert, X. Vilajosana, T. Watteyne, Q. Wang et al., Internet of Things: Challenges and Opportunities, ch. 6TiSCH Wireless Industrial Networks: Determinism Meets IPv6, pp.111-141, 2014.

P. Thubert, An Architecture for IPv6 over the TSCH mode of IEEE 802.15.4e, IETF Std. draft-ietf-6tisch-architecture-08 [work-inprogress, p.12, 2015.

Z. Shelby, S. Chakrabarti, E. Nordmark, and C. Bormann, Neighbor Discovery Optimization for IPv6 over Low-power Wireless Personal Area Networks (6LoWPANs), IETF Std, 2012.

Q. Wang, X. Vilajosana, and T. Watteyne, 6TiSCH Operation Sublayer (6top), IETF Std. draft-wang-6tisch-6top-sublayer-01, 2014.

D. Dujovne, L. A. Grieco, M. R. Palattella, and N. , Accettura, 6TiSCH On-the-Fly Scheduling, IETF Std. draft-dujovne-6tisch-on-the-fly-06 [work-in-progress, 2015.

F. Chraim, Y. Erol, and K. Pister, Wireless Gas Leak Detection and Localization, IEEE Transactions on Industrial Informatics, vol.12, issue.2
DOI : 10.1109/TII.2015.2397879

. Murvay, I. Pal-stefan, and . Silea, A survey on gas leak detection and localization techniques, Journal of Loss Prevention in the Process Industries, vol.25, issue.6, pp.966-973, 2012.
DOI : 10.1016/j.jlp.2012.05.010

R. A. Ogle, E. Scott, M. Dillon, and . Fecke, Explosion from a smoldering silo fire, Process Safety Progress, vol.33, issue.1, pp.94-103, 2014.
DOI : 10.1002/prs.11628

X. Hu, B. Wang, and H. Ji, A Wireless Sensor Network-Based Structural Health Monitoring System for Highway Bridges, Computer-Aided Civil and Infrastructure Engineering, vol.15, issue.5, pp.193-209, 2013.
DOI : 10.1111/j.1467-8667.2012.00781.x

M. J. Chae, H. S. Yoo, J. Y. Kim, and M. Y. Cho, Development of a wireless sensor network system for suspension bridge health monitoring, Automation in Construction, vol.21, pp.237-252, 2012.
DOI : 10.1016/j.autcon.2011.06.008

M. Bocca, L. M. Eriksson, A. Mahmood, R. Jntti, and J. Kullaa, A Synchronized Wireless Sensor Network for Experimental Modal Analysis in Structural Health Monitoring, Computer-Aided Civil and Infrastructure Engineering, vol.30, issue.10, pp.483-499, 2011.
DOI : 10.1111/j.1467-8667.2011.00718.x

J. Luo, W. Huang, and S. Zhang, Energy cost optimal operation of belt conveyors using model predictive control methodology, Journal of Cleaner Production, vol.105, 2014.
DOI : 10.1016/j.jclepro.2014.09.074

L. Wang and L. Zhigang, Research on Control System of Belt Conveyor in Coal Mine, Electrical, Information Engineering and Mechatronics 2011, pp.885-891
DOI : 10.1007/978-1-4471-2467-2_104

T. Watteyne, A. Mehta, and K. Pister, Reliability through frequency diversity, Proceedings of the 6th ACM symposium on Performance evaluation of wireless ad hoc, sensor, and ubiquitous networks, PE-WASUN '09, pp.116-123, 2009.
DOI : 10.1145/1641876.1641898

M. R. Palattella, N. Accettura, M. Dohler, L. A. Grieco, and G. Boggia, Traffic Aware Scheduling Algorithm for reliable low-power multihop IEEE 802.15. 4e networks, Personal Indoor and Mobile Radio Communications (PIMRC), 2012 IEEE 23rd International Symposium on, pp.327-332, 2012.
DOI : 10.1109/pimrc.2012.6362805

M. R. Palattella, N. Accettura, L. A. Grieco, G. Boggia, M. Dohler et al., On optimal scheduling in duty-cycled industrial IoT applications using IEEE802. 15.4e TSCH, Sensors Journal, IEEE, issue.10, pp.13-3655, 2013.
DOI : 10.1109/jsen.2013.2266417

A. Morell, X. Vilajosana, J. L. Vicario, and T. Watteyne, Label switching over IEEE802.15.4e networks, Transactions on Emerging Telecommunications Technologies, vol.51, issue.8, pp.458-475, 2013.
DOI : 10.1002/ett.2650

P. Thubert, Objective Function Zero for the Routing Protocol for Low- Power and Lossy Networks, p.6552, 2012.
DOI : 10.17487/rfc6552

O. Gnawali and P. Levis, The Minimum Rank with Hysteresis Objective Function, RFC, vol.6719, 2012.
DOI : 10.17487/rfc6719

R. Sudhaakar and P. Zand, 6TiSCH Resource Management and Interaction using CoAP, IETF Std. draft-ietf-6tisch-coap-02 [work-in-progress, 2014.

Q. Wang, X. Vilajosana, and T. Watteyne, 6TiSCH Operation Sublayer (6top) Interface, IETF Std. draft-ietf-6tisch-6top-interface-04, 2015.

S. Zats, Wireless Sensor Networks Scaling and Deployment in Industrial Automation, 2010.

K. Pister, P. Thubert, S. Dwars, and T. Phinney, Industrial Routing Requirements in Low-Power and Lossy Networks, IETF Std, 2009.

X. Vilajosana and K. Pister, Minimal 6TiSCH Configuration, IETF Std. draft-ietf-6tisch-minimal-11 [work-in-progress, 2015.

S. Zats, R. Su, T. Watteyne, and K. Pister, Scalability of Time Synchronized wireless sensor networking, IECON 2011, 37th Annual Conference of the IEEE Industrial Electronics Society, 2011.
DOI : 10.1109/IECON.2011.6119789

T. Watteyne, X. Vilajosana, B. Kerkez, F. Chraim, K. Weekly et al., OpenWSN: a standards-based low-power wireless development environment, Transactions on Emerging Telecommunications Technologies, vol.10, issue.10, pp.480-493, 2012.
DOI : 10.1002/ett.2558