N. Sprynski, D. David, B. Lacolle, and L. Biard, Curve Reconstruction via a Ribbon of Sensors, 14th IEEE Int. Conf. on Electronics, Circuits and Systems, pp.407-417, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00872494

T. Hoshi and H. Shinoda, 3D shape measuring sheet utilizing gravitational and geomagnetic fields, 2008 SICE Annual Conference, pp.915-935, 2008.
DOI : 10.1109/SICE.2008.4654785

N. Saguin-sprynski, L. Jouanet, B. Lacolle, and L. Biard, Surfaces Reconstruction Via Inertial Sensors for Monitoring, 7th European Workshop on Structural Health Monitoring, pp.702-711, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01020418

M. Botsch and L. Kobbelt, An Intuitive Framework for Real-time Freeform Modeling
DOI : 10.1145/1015706.1015772

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.3.4500

A. Jacobson, E. Tosun, O. Sorkine, and D. Zorin, Mixed Finite Elements for Variational Surface Modeling, Computer Graphics Forum, vol.23, issue.2, pp.1565-74, 2010.
DOI : 10.1111/j.1467-8659.2010.01765.x

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.221.556

J. Andrews, P. Joshi, and N. Carr, A Linear Variational System for Modelling From Curves, Computer Graphics Forum, vol.39, issue.5, pp.1850-61, 2011.
DOI : 10.1111/j.1467-8659.2011.01966.x

M. Huard, N. Sprynski, N. Szafran, and L. Biard, Reconstruction of quasi developable surfaces from ribbon curves, Numerical Algorithms, vol.40, issue.4, pp.483-506, 2013.
DOI : 10.1007/s11075-012-9633-3

URL : https://hal.archives-ouvertes.fr/hal-00985177

J. Gregory and J. Zhou, Filling polygonal holes with bicubic patches, Computer Aided Geometric Design, vol.11, issue.4, pp.391-410, 1994.
DOI : 10.1016/0167-8396(94)90205-4

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.542.2372

T. Várady, P. Salvi, and G. Karikó, A Multi-sided B??zier Patch with a Simple Control Structure, Computer Graphics Forum, vol.18, issue.2, pp.307-324, 2016.
DOI : 10.1111/cgf.12833

T. Igarashi, S. Matsuoka, and H. Tanaka, Teddy: A Sketching Interface for 3D Freeform Design Annual Conference Series, Proceedings of SIGGRAPH 99, pp.409-425, 1999.
DOI : 10.1007/978-1-84882-812-4_8

A. Nealen, O. Sorkine, A. M. Cohen-or, and D. , A sketch-based interface for detail-preserving mesh editing, ACM Transactions on Graphics, vol.24, issue.3, pp.1142-1149, 2005.
DOI : 10.1145/1073204.1073324

Y. Gingold and D. Zorin, Shading-based surface editing, ACM Transactions on Graphics, vol.27, issue.3, pp.1-9, 2008.
DOI : 10.1145/1360612.1360694

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.220.6945

D. S´ykoras´ykora, L. Kavan, M. Cadík, O. Jamri?ka, A. Jacobson et al., Ink-and-ray: Bas-relief Meshes for Adding Global Illumination Effects to Hand-drawn Characters, ACM Trans Graph (Proc SIGGRAPH), vol.33, issue.2, pp.161-1615, 2014.

E. Iarussi, D. Bommes, and A. Bousseau, BendFields, ACM Transactions on Graphics, vol.34, issue.3, p.24, 2015.
DOI : 10.1145/2710026

URL : https://hal.archives-ouvertes.fr/hal-01261456

G. Farin, Curves and Surfaces for CAGD: A Practical Guide

G. Farin and D. Hansford, Discrete Coons patches, Computer Aided Geometric Design, vol.16, issue.7, pp.691-700, 1999.
DOI : 10.1016/S0167-8396(99)00031-X

S. Bae, R. Balakrishnan, and K. Singh, ILoveSketch, Proceedings of the 21st annual ACM symposium on User interface software and technology, UIST '08, pp.151-60, 2008.
DOI : 10.1145/1449715.1449740

R. Schmidt, A. Khan, K. Singh, and G. Kurtenbach, Analytic Drawing of 3D Scaffolds, ACM Trans Graph (Proc SIGGRAPH Asia), vol.28149, issue.5, pp.1-14910, 2009.
DOI : 10.1145/1618452.1618495

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.156.2611

B. Xu, W. Chang, A. Sheffer, A. Bousseau, J. Mccrae et al., True2Form, ACM Transactions on Graphics, vol.33, issue.4, pp.1-13113, 2014.
DOI : 10.1145/2601097.2601128

URL : https://hal.archives-ouvertes.fr/hal-01060850

K. Rose, A. Sheffer, J. Wither, M. Cani, and B. Thibert, Developable Surfaces from Arbitrary Sketched Boundaries, Proc. Symp. Geom. Proc. 2007, pp.163-72
URL : https://hal.archives-ouvertes.fr/inria-00337445

A. Rivers, F. Durand, and T. Igarashi, 3D Modeling with Silhouettes, ACM Trans Graph (Proc SIGGRAPH), vol.29, issue.4, pp.1-8, 2010.
DOI : 10.1145/1833351.1778846

N. Umetani, D. Kaufman, T. Igarashi, and E. Grinspun, Sensitive Couture for Interactive Garment Modeling and Editing, ACM Trans Graph (Proc SIGGRAPH), vol.30, issue.4, pp.901-9012, 2011.
DOI : 10.1145/1964921.1964985

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.228.6159

F. Tasse, A. Emilien, M. Cani, S. Hahmann, and N. Dodgson, Feature-based terrain editing from complex sketches, Computers & Graphics, vol.45, pp.101-116, 2014.
DOI : 10.1016/j.cag.2014.09.001

URL : https://hal.archives-ouvertes.fr/hal-01100061

H. Pan, Y. Liu, A. Sheffer, N. Vining, C. Li et al., Flow aligned surfacing of curve networks, ACM Transactions on Graphics, vol.34, issue.4, pp.1-12710, 2015.
DOI : 10.1145/2766990

A. Jung, S. Hahmann, D. Rohmer, A. Begault, L. Boissieux et al., Sketching Folds, ACM Transactions on Graphics, vol.34, issue.5, pp.1-15512, 2015.
DOI : 10.1145/2749458

URL : https://hal.archives-ouvertes.fr/hal-01152904

A. Nealen, T. Igarashi, O. Sorkine, and A. M. , FiberMesh: Designing Freeform Surfaces with 3D Curves, ACM Trans Graph (Proc SIG- GRAPH), vol.26, issue.3, 2007.

T. Stanko, S. Hahmann, G. Bonneau, and N. Saguin-sprynski, Smooth interpolation of curve networks with surface normals, EG 2016 ? Short Papers
URL : https://hal.archives-ouvertes.fr/hal-01342487

P. Lisbon, Eurographics Association, pp.21-25

L. Kara and K. Shimada, Sketch-Based 3D-Shape Creation for Industrial Styling Design, IEEE Computer Graphics and Applications, vol.27, issue.1, pp.60-71, 2007.
DOI : 10.1109/MCG.2007.18

K. Das, P. Diaz-gutierrez, and M. Gopi, Sketching FreeForm Surfaces Using Network of Curves, Eurographics Workshop on Sketch-Based Interfaces and Modeling, 2005.

Y. Zhuang, M. Zou, N. Carr, and T. Ju, A general and efficient method for finding cycles in 3D curve networks, ACM Transactions on Graphics, vol.32, issue.6, pp.1-18010, 2013.
DOI : 10.1145/2508363.2508423

M. Bessmeltsev, C. Wang, A. Sheffer, and K. Singh, Design-driven quadrangulation of closed 3D curves, ACM Transactions on Graphics, vol.31, issue.6, pp.1-17811, 2012.
DOI : 10.1145/2366145.2366197

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.412.226

B. Sadri and K. Singh, Flow-complex-based shape reconstruction from 3D curves, ACM Transactions on Graphics, vol.33, issue.2, pp.1-20, 2014.
DOI : 10.1145/2560328

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.644.56

S. Schaefer, J. Warren, and D. Zorin, Lofting curve networks using subdivision surfaces, Proceedings of the 2004 Eurographics/ACM SIGGRAPH symposium on Geometry processing , SGP '04, pp.103-117
DOI : 10.1145/1057432.1057447

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.5.1280

I. Boier-martin, R. Ronfard, and F. Bernardini, Detail-preserving Variational Surface Design with Multiresolution Constraints, Proc. Shape Modeling Applications, pp.119-147, 2004.
DOI : 10.1109/smi.2004.1314499

URL : https://hal.archives-ouvertes.fr/inria-00590166

H. Moreton and C. Séquin, Functional optimization for fair surface design, ACM SIGGRAPH Computer Graphics, vol.26, issue.2, pp.167-76, 1992.
DOI : 10.1145/142920.134035

M. Botsch and O. Sorkine, On Linear Variational Surface Deformation Methods, IEEE Transactions on Visualization and Computer Graphics, vol.14, issue.1, pp.213-243, 2008.
DOI : 10.1109/TVCG.2007.1054

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.325.3522

G. Farin, A construction for visual C1 continuity of polynomial surface patches, Computer Graphics and Image Processing, vol.19, issue.1, pp.272-82, 1982.
DOI : 10.1016/0146-664X(82)90166-6

R. Schneider and L. Kobbelt, Geometric fairing of irregular meshes for free-form surface design, Computer Aided Geometric Design, vol.18, issue.4, pp.359-79, 2001.
DOI : 10.1016/S0167-8396(01)00036-X

K. Crane, U. Pinkall, and P. Schröder, Robust fairing via conformal curvature flow, ACM Transactions on Graphics, vol.32, issue.4, 2013.
DOI : 10.1145/2461912.2461986

J. Shewchuk, Triangle: Engineering a 2D Quality Mesh Generator and Delaunay Triangulator Applied computational geometry towards geometric engineering, pp.203-225, 1996.
DOI : 10.1007/bfb0014497

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.40.9874

M. Zou, T. Ju, and N. Carr, An algorithm for triangulating multiple 3D polygons, Computer Graphics Forum, vol.1, issue.2, pp.157-66, 2013.
DOI : 10.1111/cgf.12182

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.310.5819

M. Meyer, M. Desbrun, P. Schröder, and A. Barr, Discrete Differential-Geometry Operators for Triangulated 2-Manifolds, pp.35-57, 2003.
DOI : 10.1007/978-3-662-05105-4_2

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.24.3427

J. Sullivan, A. Bobenko, J. Sullivan, P. Schröder, and G. Ziegler, Curvatures of Smooth and Discrete Surfaces, Discrete Differential Geometry; Oberwolfach Seminars, pp.175-88, 2008.
DOI : 10.1007/978-3-7643-8621-4_9

URL : http://arxiv.org/abs/0710.4497

E. Grinspun, Y. Gingold, J. Reisman, and D. Zorin, Computing discrete shape operators on general meshes, Computer Graphics Forum, vol.2, issue.1, pp.547-56, 2006.
DOI : 10.1016/S0045-7825(97)00085-6

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.143.7624