M. Taufik and P. K. Jain, Role of build orientation in layered manufacturing: a review, International Journal of Manufacturing Technology and Management, vol.27, issue.1/2/3, p.47, 2013.
DOI : 10.1504/IJMTM.2013.058637

X. Zhang, X. Le, A. Panotopoulou, E. Whiting, and C. C. Wang, Perceptual models of preference in 3D printing direction, ACM Transactions on Graphics, vol.34, issue.6, pp.1-12, 2015.
DOI : 10.1145/2816795.2818121

A. Dolenc and M. I. , Slicing procedures for layered manufacturing techniques, Computer-Aided Design, vol.26, issue.2, pp.119-126, 1994.
DOI : 10.1016/0010-4485(94)90032-9

E. Sabourin, S. A. Houser, and J. H. Bhn, Adaptive slicing using stepwise uniform refinement, Rapid Prototyping Journal, vol.2, issue.4, pp.20-26, 1996.
DOI : 10.1108/13552549610153370

P. Kulkarni and D. Dutta, An accurate slicing procedure for layered manufacturing, Computer-Aided Design, vol.28, issue.9, pp.683-697, 1996.
DOI : 10.1016/0010-4485(95)00083-6

R. L. Hope, R. N. Roth, and P. A. Jacobs, Adaptive slicing with sloping layer surfaces, Rapid Prototyping Journal, vol.3, issue.3, pp.89-98, 1997.
DOI : 10.1108/13552549710185662

M. T. Hayasi and B. Asiabanpour, A new adaptive slicing approach for the fully dense freeform fabrication (FDFF) process, Journal of Intelligent Manufacturing, vol.38, issue.1, pp.683-694, 2013.
DOI : 10.1007/s10845-011-0615-4

W. Wang, H. Chao, J. Tong, Z. Yang, X. Tong et al., Saliency-Preserving Slicing Optimization for Effective 3D Printing, Computer Graphics Forum, vol.31, issue.6, pp.148-160, 2015.
DOI : 10.1111/cgf.12527

A. Boschetto and L. Bottini, Triangular mesh offset aiming to enhance Fused Deposition Modeling accuracy, The International Journal of Advanced Manufacturing Technology, vol.67, issue.9???12, pp.99-111, 2015.
DOI : 10.1007/s00170-015-6992-7

Z. Zhao and Z. Luc, Adaptive direct slicing of the solid model for rapid prototyping, International Journal of Production Research, vol.38, issue.1, pp.69-83, 2000.
DOI : 10.1080/002075400189581

K. Tata, G. Fadel, A. Bagchi, and N. Aziz, Efficient slicing for layered manufacturing, Rapid Prototyping Journal, vol.4, issue.4, pp.151-167, 1998.
DOI : 10.1108/13552549810239003
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.622.5709

E. Sabourin, S. A. Houser, and J. H. Bhn, Accurate exterior, fast interior layered manufacturing, Rapid Prototyping Journal, vol.3, issue.2, pp.44-52, 1997.
DOI : 10.1108/13552549710176662

J. Tyberg and J. H. Bhn, Local adaptive slicing, Rapid Prototyping Journal, vol.4, issue.3, pp.118-127, 1998.
DOI : 10.1108/13552549810222993

K. Mani, P. Kulkarni, and D. Dutta, Region-based adaptive slicing, Computer-Aided Design, vol.31, issue.5, pp.317-333, 1999.
DOI : 10.1016/S0010-4485(99)00033-0

K. Hildebrand, B. Bickel, and M. , Orthogonal slicing for additive manufacturing, Computers & Graphics, vol.37, issue.6, pp.669-675, 2013.
DOI : 10.1016/j.cag.2013.05.011

R. Hu, H. Li, H. Zhang, and D. Cohen-or, Approximate pyramidal shape decomposition, ACM Transactions on Graphics, vol.33, issue.6, pp.213-214, 2014.
DOI : 10.1145/2661229.2661244
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.675.6288

W. M. Wang, C. Zanni, and L. Kobbelt, Improved Surface Quality in 3D Printing by Optimizing the Printing Direction, Computer Graphics Forum, vol.31, issue.6, pp.59-70, 2016.
DOI : 10.1111/cgf.12556.2

D. Chakraborty, B. A. Reddy, and A. R. Choudhury, Extruder path generation for Curved Layer Fused Deposition Modeling, Computer-Aided Design, vol.40, issue.2, pp.235-243, 2008.
DOI : 10.1016/j.cad.2007.10.014

S. Singamneni, A. Roychoudhury, O. Diegel, and B. Huang, Modeling and evaluation of curved layer fused deposition, Journal of Materials Processing Technology, vol.212, issue.1, pp.27-35, 2012.
DOI : 10.1016/j.jmatprotec.2011.08.001

B. Huang and S. Singamneni, Alternate slicing and deposition strategies for fused deposition modelling of light curved parts, J. of Achievem in mat and manuf, vol.55, issue.2, pp.511-517, 2012.

R. J. Allen and R. S. Trask, An experimental demonstration of effective Curved Layer Fused Filament Fabrication utilising a parallel deposition robot, Additive Manufacturing, vol.8, pp.78-87, 2015.
DOI : 10.1016/j.addma.2015.09.001

S. Mueller, S. Im, S. Gurevich, A. Teibrich, L. Pfisterer et al., WirePrint, Proceedings of the 27th annual ACM symposium on User interface software and technology, UIST '14, p.2014
DOI : 10.1145/2642918.2647359

R. E. Williams and V. L. Melton, Abrasive flow finishing of stereolithography prototypes, Rapid Prototyping Journal, vol.4, issue.2, pp.56-67, 1998.
DOI : 10.1108/13552549810207279

P. M. Pandey, N. V. Reddy, and S. G. Dhande, Virtual hybrid-FDM system to enhance surface finish, Virtual and Physical Prototyping, vol.122, issue.2, pp.101-116, 2006.
DOI : 10.1108/13552549810207279

Y. Pan, X. Zhao, C. Zhou, and Y. Chen, Smooth surface fabrication in mask projection based stereolithography, Journal of Manufacturing Processes, vol.14, issue.4, pp.460-470, 2012.
DOI : 10.1016/j.jmapro.2012.09.003

Y. Pan and Y. Chen, Smooth Surface Fabrication Based on Controlled Meniscus and Cure Depth in Microstereolithography, Journal of Micro and Nano-Manufacturing, vol.3, issue.3, pp.2015-031001
DOI : 10.1115/1.4030661

I. B. Park, Y. M. Ha, and S. H. Lee, Dithering method for improving the surface quality of a microstructure in projection microstereolithography, The International Journal of Advanced Manufacturing Technology, vol.17, issue.2, pp.5-8, 2011.
DOI : 10.1007/s00170-010-2748-6

H. Q. Dinh, F. Gelman, S. Lefebvre, and F. Claux, Modeling and toolpath generation for consumer-level 3d printing, ACM SIGGRAPH 2015 Courses on, SIGGRAPH '15, pp.171-17273, 2015.
DOI : 10.1145/2776880.2792702

J. Hergel and S. Lefebvre, Clean color: Improving multi-filament 3D prints, Computer Graphics Forum, vol.32, issue.4, pp.469-478, 2014.
DOI : 10.1111/cgf.12318