A. Piccard and R. Anderl, Integrated Component Data Model for Smart Production Planning, 19° Seminário Internacional de Alta Tecnologia, 2014.

H. Elmaraghy, G. Schuh, W. Elmaraghy, F. Piller, P. Schönsleben et al., Product variety management, CIRP Annals, vol.62, issue.2, pp.629-652, 2013.
DOI : 10.1016/j.cirp.2013.05.007

F. Salvador, P. M. De-holan, and F. Piller, Cracking the Code of Mass Customization | MIT Sloan Management Review, MIT Sloan Manag. Rev, issue.50315, 2009.

P. Zipkin, The Limits of Mass Customization, MIT Sloan Manag. Rev, vol.42, pp.1-7, 2001.

F. Salvador, C. Forza, and M. Rungtusanatham, Modularity, product variety, production volume, and component sourcing: theorizing beyond generic prescriptions, Journal of Operations Management, vol.20, issue.5, pp.549-575, 2002.
DOI : 10.1016/S0272-6963(02)00027-X
URL : http://www.alvarestech.com/temp/PDP2011/CDAndrea/MODULARIDADE/SALVADOR 2005 MODULARIZA%C7%C3O.pdf

S. J. Hu, J. Ko, L. Weyand, H. A. Elmaraghy, T. K. Lien et al., Assembly system design and operations for product variety, CIRP Annals, vol.60, issue.2, pp.715-733, 2011.
DOI : 10.1016/j.cirp.2011.05.004

H. Elmaraghy and W. Elmaraghy, Smart Adaptable Assembly Systems, Procedia CIRP, vol.44, pp.4-13, 2016.
DOI : 10.1016/j.procir.2016.04.107

H. Kagermann, W. Wahlster, and J. Helbig, Recommendations for implementing the strategic initiative INDUSTRIE 4.0, 2013.

E. Hobsbawn, The Age of Revolution, 1961.

S. Ariss, T. Raghunathan, and A. Kunnathar, Factors affecting the adoption of advanced manufacturing technology in small firms, S.A.M. Adv. Manag. J, 2000.

H. Sun, Current and future patterns of using advanced manufacturing technologies, Technovation, vol.20, issue.11, 2000.
DOI : 10.1016/S0166-4972(00)00007-9

K. Boyer and M. Pagell, Measurement issues in empirical research: improving measures of operations strategy and advanced manufacturing technology, Journal of Operations Management, vol.18, issue.3, 2000.
DOI : 10.1016/S0272-6963(99)00029-7

S. Kotha, Strategy, manufacturing structure and advancedmanufacturing technology, National Conference of the Academy of Management, 1991.

Y. Koren and M. Shpitalni, Design of reconfigurable manufacturing systems, Journal of Manufacturing Systems, vol.29, issue.4, pp.130-141, 2010.
DOI : 10.1016/j.jmsy.2011.01.001

H. P. Wang and J. K. Li, Computer-aided process planning, 1991.

K. Nguyen, H. Minh-tu, and . Nguyen, Virtual, Augmented and Mixed Reality, 5th Int. Conf. VAMR 2013, Held as Part HCI Int. 2013, p.399, 2013.

R. K. Rajput, A Textbook of Manufacturing Technology (Manufacturing Processes), 2007.

J. Camelio, S. J. Hu, and D. Ceglarek, Modeling Variation Propagation of Multi-Station Assembly Systems With Compliant Parts, Journal of Mechanical Design, vol.24, issue.4, pp.673-681, 2003.
DOI : 10.1007/BF01580066

H. S. Seo and B. M. Kwak, Efficient statistical tolerance analysis for general distributions using three-point information, International Journal of Production Research, vol.35, issue.4, pp.931-944, 2002.
DOI : 10.1016/S0166-3615(97)00087-0

P. P. Camanho and F. L. Matthews, Stress analysis and strength prediction of mechanically fastened joints in FRP: a review, Composites Part A: Applied Science and Manufacturing, vol.28, issue.6, pp.529-547, 1997.
DOI : 10.1016/S1359-835X(97)00004-3

Y. Zhang, Y. Yin, and M. Yang, A new selective assembly approach for remanufacturing of mating parts, The 40th International Conference on Computers & Indutrial Engineering, 2010.
DOI : 10.1109/ICCIE.2010.5668287

M. Liu, J. Ma, L. Lin, M. Ge, Q. Wang et al., Intelligent assembly system for mechanical products and key technology based on internet of things, Journal of Intelligent Manufacturing, vol.22, issue.3, 2014.
DOI : 10.1007/s002919900032

J. A. Slotwinski and R. B. Tilove, Smart assembly, Proceedings of the 2007 Workshop on Performance Metrics for Intelligent Systems, PerMIS '07, pp.271-276, 2007.
DOI : 10.1145/1660877.1660914

D. Strang and R. Anderl, Assembly Process driven Component Data Model in Cyber- Physical Production Systems, World Congress on Engineering and Computer Science, pp.22-24, 2014.

S. Takata, F. Kimura, F. J. , M. Van-houten, and E. Westkämper, Maintenance: Changing Role in Life Cycle Management, CIRP Annals, vol.53, issue.2, pp.643-655, 2004.
DOI : 10.1016/S0007-8506(07)60033-X

L. F. Durao, H. Eichhorn, R. Anderl, K. Schuetzer, and E. Zancul, Integrated Component Data Model Based on UML for Smart Components Lifecycle Management: A Conceptual Approach, IFIP Adv. Inf. Commun. Technol, vol.467, pp.13-22, 2015.
DOI : 10.1007/978-3-319-33111-9_2
URL : https://hal.archives-ouvertes.fr/hal-01377424

X. Tang and H. Yun, Data model for quality in product lifecycle, Computers in Industry, vol.59, issue.2-3, pp.3-167, 2008.
DOI : 10.1016/j.compind.2007.06.011