for Action Recognition

. This paper presents a content-aware attention network (Cat-Net) for action recognition task, which can leverage attention mechanism to aggregate frame-level features into a compact video-level representation. Unlike most previous methods that consider every video frame equally, our CatNet contains an attention module which can adaptively emphasize the representative frames, and thus can beneﬁt the action recognition task. Moreover, the CatNet can take an action video with arbitrary length yet produce a compact video representation with ﬁxed length. The attention module consists of two cascaded blocks, an adaptive attention weighting block and a content-aware weighting block. The experiments are carried on two challenging video action datasets, i.e. , the UCF-101 dataset and HMDB-51 dataset. Our method achieves sig-niﬁcantly improvements on both datasets compared with existing meth-ods. The results show that our proposed CatNet is able to focus on the representative frames corresponding to a speciﬁc action category, and meanwhile signiﬁcantly improve the recognition performance.

However, compared with the successes achieved by CNN in still image classification field [13][14][15]17], the action recognition task has not been fully explored yet. There still remains many challenges need to be further addressed. In order to  Fig. 1. Some example frames alone with their action category labels that are not suited for the action recognition task. In these cases, it is very difficult to predict the video category by a single frame. The first row consists of frames with semantic ambiguity, which can be easily mistaken for PlayingDaf, BrushingTeeth, CleanAndJerk, ApplyLipstick and Skiing from left to right. The second row consists of frames in poor condition, such as motion blur and poor illumination.
better recognize the action categories inside a variety of videos, the action/video representation should be discriminative and, more importantly, compact. Thus, one of the key issues is how to construct a discriminative and compact video-level representation. Hand-crafted feature based methods usually employ encoding methods, such as Fisher Vectors [16], to aggregate local hand-crafted descriptors into a global video representation [4]. With the benefit from the deep CNN, early CNN based methods propose to use a single frame to represent the whole video [6], or feed multiple frames into CNN and aggregate them with average or max pooling strategy [9,18]. In addition, [19] proposed to employ a long shortterm memory (LSTM) network upon the CNN, which can model the temporal correlations among frames into a fixed-length representation. To further explore both the spatial and temporal correlations among video frames simultaneously, [20] first proposed the 3D convolution pipeline to handle related tasks in videos. We argue that to effectively aggregate frame-level descriptors and construct a compact video-level representation, an adaptive content-aware aggregation method is vital. The motivation behind this idea is quite intuitive, i.e., there should exist a subset of the video frames, which are more tightly related to the action category. Thus, we should emphasize these representative frames when aggregating the frame-level descriptors, in order to make the aggregated videolevel representation discriminative. Figure 1 gives some example frames alone with their action category labels that are not suitable for the recognition task, due to semantic ambiguity or motion blur. These "bad" samples will introduce noisy information into the inference stage of the neural network [21]. These ambiguities should be suppressed during the inference process. Therefore, it is a natural sense to utilize the attention mechanism for action recognition, which can enable the whole network to focus on the representative frames and suppress the noises. First, they are embedded by a CNN (base model). Then, the extracted features are aggregated by the proposed content-aware attention weighting module, and a fixedlength representation can be obtained. Finally, we use this representation to classify the input video, and adopt score fusion to obtain the prediction of the video.
We propose a content-aware attention network (CatNet) embedding an effective attention module to identify the representative frames from the noisy ones. The framework of the CatNet is illustrated in Fig. 2. The attention module consists of two cascaded blocks, i.e., an adaptive attention weighting block which can adaptively weight all frames fed into the CatNet based on their extracted features, and a content-aware weighting block which is added to constrain the aggregation weights to be more consistent with the video content. To capture both the appearance and motion information, a standard two-stream structure is adopted, where each stream can be trained in an end-to-end manner.
The main contributions of this paper are: -We propose a novel structure, namely CatNet, for action recognition, which achieves state-of-the-art performance. -We introduce the attention mechanism to action recognition and validate it is beneficial for the action recognition task.
The rest of the paper is organized as follows. Section 2 reviews previous work related to action recognition. Section 3 presents the content-aware attention network for action recognition. Section 4 introduces the experiments and discussions. Section 5 presents the conclusion and future work.

Related Work
In this section, we review the related work in action recognition, mainly including hand-crafted feature based methods, and deep learning based methods.

Hand-Crafted Feature Based Methods
Before the prevalent of deep learning, hand-crafted feature based methods have dominated the action recognition filed [4,[22][23][24]. Plenty of image local descriptors have been extended to the video domain, such as 3D-sift [25], HOG3D [26], and motion boundary histograms (MBH) [27]. The improved Dense Trajectory (iDT) [4] achieves state-of-the-art performance among these hand-crafted feature based methods. The iDT consists of multiple local descriptors extracted along with the dense trajectories where camera motion is compensated. To perform action recognition, the descriptors are then aggregated into a video-level representation by using encoding methods, such as Fisher vector [16].

Deep Learning Based Methods
Aggregating Frame-Level Features. Recently, the CNN based image descriptors have emerged as the state-of-the-art generic descriptors for visual recognition. To obtain a discriminative frame-level representation, the recent work on action recognition almost always extract the CNN feature as the framelevel descriptor, and then aggregate them into a global video-level representation. The aggregation methods can be roughly divided into two categories. The first one is to employ recurrent neural network (RNN) upon a frame-level feature extractor, such as LSTM [19]. By plugging RNN on top of CNN, temporal correlations within the action video can be easily captured, and a compact fixed-length video representation is then obtained. The other one aims to aggregate the frame-level features via different pooling methods, such as the average or max pooling over time [9], the vector of locally aggregated descriptors (VLAD) [10,28], and the temporal pyramid pooling (TPP) [29]. All these methods treat the frame-level features equally during aggregation, which may inevitably over-weight the noisy frames. To eliminate the negative influence from noisy frames, we propose to embed an attention module into action recognition, which can adaptively emphasize the representative frames while suppressing the influence from noisy frames.
Spatio-temporal CNN. The spatio-temporal CNN was first proposed in [20] and named 3D CNN, and later a number of its variants were proposed [8,11,30,31]. The 3D CNN based action recognition methods take the video clip as input, and aim to model both the spatial and temporal correlations among the video content. Considering the 3D convolution brings extra kernel parameters, to fully train 3D CNN model usually requires massive video data and is time consuming, and thus 3D CNN is unsuitable to handle small dataset [11,18].

Content-Aware Attention Network
This section details the proposed content-aware attention network (CatNet). As shown in Fig. 2, our proposed CatNet takes a video with arbitrary length as input, and outputs a fixed-length video representation for subsequent action recognition task. The frame-level feature embedding is based on the CNN model, which is followed by an adaptive attention weighting block and a content-aware weighting block. These two blocks enable the CatNet to adaptively emphasize the representative frames and meanwhile suppress the noisy ones.

Frame-Level Feature Embedding
The frame-level features are extracted using the deep CNN, which embeds each frame of an action video to a fixed-length vector. Here, we adopt the Inception with Batch Normalization [32] as the feature extractor (base model). Note that our proposed attention module is not limited to a specific CNN model, other CNN models can also be used. The extracted d-dimension CNN features are first normalized by L2 norm and then fed into the attention module. Formally, given a video V = {f t } T t=1 with T frames, where f t denotes the tth frame, the feature embedding can be formulated as where F denotes the base model and W denotes the parameters of F. x t ∈ R d represents the extracted d-dimensional feature of f t .x t is a normalized feature.

Adaptive Attention Weighting Block
As obtained the feature x t of each frame f t by feature embedding, our goal is to obtain a fixed-length video representation for video V by aggregating its frame-level descriptors X = {x t } T t=1 . Our adaptive attention weighting block first computes a corresponding weight w t for each frame f t , and then aggregates the frame-level descriptors into a fix-length video-level representation by Here, the key is how to compute an appropriate weight w t for x t according to its importance. If w t = 1 T , then this block will degrade to average pooling. There are two issues need to be considered when building the adaptive attention weighting block. First, the block should be able to handle videos with arbitrary lengths. Second, the block should be differentiable, i.e., can be easily plugged into the current networks to perform an end-to-end training. Our proposed solution is to introduce a learnable kernel k with the same dimension as x. Then, w t can be calculated by Here, k actually serves as a scoring function. It is expected that if x t is discriminative, w t will be larger, and vice versa. In this way, the video representation v calculated by Eq. (3) will adaptively emphasize the representative frames and suppress the noisy frames during aggregation.

Content-Aware Weighting Block
To leverage context information, which is popular in image segmentation field [33,34], a content-aware weighting block is introduced to let the attention module select the discriminative features by considering the content throughout the video instead of single frames. Inspired by [35] for language modeling, we borrow the ideas from [35,36] and adjust it to the action recognition task. The content-aware weighting block can be formulated as where σ denotes the sigmoid function and k c serves as a new weighting kernel which is content-aware. W c ∈ R d×d and b ∈ R d are trainable parameters of this block. v c is the final fixed-length representation of the input video.

Two-Stream Structure
It is critical to capture temporal information for action recognition. A common way to capture temporal information is adopting the two-stream structure [6,37]. We also employ this validated effective structure to combine the spatial and temporal features. Each of the two streams is constructed as described above, and can be trained in an end-to-end way. To fuse the scores from these two streams, the simplest weighted average fusion strategy is utilized.

Experiments and Discussions
We evaluate the performance of the proposed CatNet on two challenging action datasets, including UCF-101 dataset [38] and HMDB-51 dataset [39]. The UCF-101 dataset contains 13320 action videos in 101 action categories. Our evaluation on UCF-101 dataset follows the scheme of the THUMOS-13 challenge [40]. We use all the three training/testing splits, and report the average accuracy on them.
The HMDB-51 dataset contains 6766 videos in 51 action categories. We follow the standard evaluation scheme with three training/testing splits, and report the average accuracy on them. We proceed to introduce the implementation details of our method, and then explore the efficacy of our attention module and compare with baseline method. Finally, our CatNet is compared with the state-of-the-art methods.

Implementation Details
We use the stochastic gradient descent optimizer to train the network, by setting momentum to be 0.9 and batch size to be 32. We implement a two-stream CNN framework with the spatial stream for RGB image inputs and temporal stream for optical flow inputs, as multi-modality inputs offer more information [9,41,43,45]. We choose the Inception with Batch Normalization (BN-Inception) [32] as the building block for both spatial and temporal stream, because of its good balance between accuracy and efficiency. We adopt the partial BN with extra dropout layer proposed in [9] to avoid over-fitting. For the spatial stream, the weights are initialized by pre-trained models from ImageNet [42]. While for the temporal stream, we use the cross modality pre-training proposed in [9]. As to data augmentation, we employ the scale jittering technique [44] and random horizontal flipping. For the computation of optical flow, we use the TVL1 optical flow algorithm [46], which is implemented in OpenCV with CUDA. When fusing the scores from the two streams, we average the final prediction score of each stream with a weight 1 for spatial stream and a weight 1.5 for temporal stream.

Evaluation of the Proposed Attention Module
To validate the efficacy of the proposed attention module, we compared it with a baseline aggregation strategy, i.e. average pooling. The average accuracies for action recognition of them are summarized in Table 1. They showed that our aggregation strategy outperforms the average pooling on both of the UCF-101 dataset [38] and HMDB-51 dataset [39]. This clearly manifests that the proposed attention module can improve the action recognition performance. It can be also seen that the performance improvement on HMDB-51 is larger than that on UCF-101. This is mainly because the videos in HMDB-51 contain more noisy frames that should be suppressed. Note that the improvement on temporal stream is less than that on spacial stream. This is because the optical flow fields contain less noise and are more discriminative than RGB images, especially for the action recognition task. Besides, to further verify the efficacy of the proposed attention module, we visualize what has been learnt by the attention module. Figure 3 presents some example frames sorted by their attention weights. They showed that the proposed Fig. 3. Some example frames sorted by their attention weights from high (left) to low (right) along with their action category labels. The frames of the left part are from the UCF-101 dataset, and the frame of the right part are from the HMDB-51 dataset. We can see that the representative frames are assigned with higher attention weights compared with frames in poor conditions, such as motion blur (e.g., Biking and Knitting), shot changing (e.g., Smile), irrelevant clips (e.g., Shoot Gun and Run), partial observation (e.g., Brushing Teeth and Haircut), and semantic ambiguity (e.g., Tennis Swing and Hug).
attention module can automatically pay more attention to the representative frames while suppressing the frames in poor condition, without providing any extra supervision during training. For example, in video "Hug", it is difficult to judge it is either hugging or hand shaking by the frames with low attention. However, the frames with higher attention can clearly reveal the hugging action. Similar examples can be found in other videos shown in Fig. 3.
Moreover, it is interesting to observe that our attention module assigns high attention to frames containing action "Stand" in the video labelled as "Stand", while it assigns low attention to frames containing similar action in other videos (as shown in "Sit" and "Stand" videos in Fig. 3). This validates that our attention module is content-aware.

Evaluation of the Proposed CatNet for Action Recognition
After comparing with baseline methods to validate the efficacy of our proposed attention module, it is also very important to compare our CatNet with other state-of-the-art methods for action recognition. We present the average accuracies of CatNet and a variety of recently proposed action recognition methods on both UCF-101 dataset [38] and HMDB-51 dataset [39] in Table 2.
The results showed that, the two-stream version of CatNet significantly outperforms other state-of-the-art methods, although we adopt the simplest weighted average fusion strategy. Moreover, both the single stream versions of our method can achieve competitive performances, when comparing with the hand-crafted based methods (e.g., [4]), LSTM based methods (e.g., [19]), and 3D CNN based methods (e.g., [8]).

Conclusion and Future Work
This paper proposed a content-aware attention network for action recognition, which leverages an attention module to aggregate the frame-level features into a compact video-level representation. Experimental results on the UCF-101 dataset and HMDB-51 dataset validated the efficacy of the proposed attention module and also the whole action recognition method, and demonstrated that the attention module can lead the content-aware attention network to adaptively emphasize the representative frames while suppressing the noisy frames.
For future work, we aim to extend our content-aware attention network to handle untrimmed action videos, where we argue that the attention module can play a more significant role. We will conduct extensive experiments on untrimmed videos to fully explore the efficacy of the attention module. Moreover, we only validate that the attention module can help improving the action recognition performance in this paper. In future work, we will extend the attention module to action localization or action segmentation task.