E. Hobsbawn, The Age of Revolution, 1961.

H. Kagermann, W. Wahlster, and J. Helbig, Recommendations for implementing the strategic initiative INDUSTRIE, 2013.

B. Schleich, N. Anwer, L. Mathieu, and S. Wartzack, Shaping the digital twin for design and production engineering, CIRP Ann -Manuf Technol, vol.66, pp.141-144, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01513846

F. Tao and M. Zhang, Digital Twin Shop-Floor: A New Shop-Floor Paradigm Towards Smart Manufacturing, vol.5, pp.20418-20427, 2017.

R. Rosen, V. Wichert, G. Lo, G. Bettenhausen, and K. D. , About the importance of autonomy and digital twins for the future of manufacturing, IFAC-PapersOnLine, vol.28, pp.567-572, 2015.

H. Zhang, Q. Liu, and X. Chen, A digital twin-based approach for designing and decoupling of hollow glass production line, IEEE Access, vol.1, issue.1, 2017.

M. M. Carvalho, A. Fleury, and A. P. Lopes, An overview of the literature on technology roadmapping (TRM): Contributions and trends, Technol Forecast Soc Chang, vol.80, pp.1418-1437, 2013.

D. N. Boote and P. Beile, Scholars Before Researchers: On the Centrality of the Dissertation Literature Review in Research Preparation, Educ Res, vol.34, pp.3-15, 2005.

L. Durão, M. Grotti, and P. Maceta, A review of the soft side in project management: concept, trends and challenges. GEPROS Gestão da Produção, Operações e Sist, vol.12, pp.157-176, 2017.

V. Duriau, R. Reger, and M. D. Pfarrer, A Content Analysis of the Content Analysis Literature in Organization Studies Research Themes, Data Sources, and Methodological Refinements, Organ Res Methods, vol.10, pp.5-34, 2007.

R. Anderl, Industrie 4.0 -Advanced Engineering of Smart Products and Smart Production, 2014.

A. Piccard and R. Anderl, Integrated Component Data Model for Smart Production Planning, 19° Seminário Internacional de Alta Tecnologia, 2014.

M. Brettel, N. Friederichsen, M. Keller, and M. Rosenberg, How Virtualization , Decentralization and Network Building Change the Manufacturing Landscape: An Industry 4.0 Perspective, Int J Mech Aerospace, Ind Mechatronics Eng, vol.8, pp.37-44, 2014.

J. Lee, B. Bagheri, and H. Kao, A Cyber-Physical Systems architecture for Industry 4 . 0-based manufacturing systems, Manuf Lett, vol.3, pp.18-23, 2015.

L. Monostori, Cyber-physical production systems: Roots, expectations and R&D challenges, Procedia CIRP, pp.9-13, 2014.

F. Tao, J. Cheng, and Q. Qi, Digital twin-driven product design, manufacturing and service with big data, Int J Adv Manuf Technol, 2017.

B. Brenner and V. Hummel, Digital Twin as Enabler for an Innovative Digital Shopfloor Management System in the ESB Logistics Learning Factory at Reutlingen -University, Procedia Manuf, vol.9, pp.198-205, 2017.

S. Kubler, J. Robert, and A. Hefnawy, Open IoT Ecosystem for Sporting Event Management, IEEE Access, vol.5, pp.7064-7079, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01531587

S. Wiesner, M. Freitag, I. Westphal, and K. D. Thoben, Interactions between service and product lifecycle management, Procedia CIRP, vol.30, pp.36-41, 2015.

F. Belkadi and A. Bernard, Trust-based patterns for the management of inter-enterprises collaborations in context of extended enterprise, IFAC-PapersOnLine, vol.28, pp.1186-1191, 2015.

K. M. Alam, E. Saddik, and A. , C2PS: A digital twin architecture reference model for the cloud-based cyber-physical systems, IEEE Access, vol.5, pp.2050-2062, 2017.

A. Canedo, Industrial IoT lifecycle via digital twins, Proc Elev IEEE/ACM/IFIP Int Conf Hardware/Software Codesign Syst Synth -CODES '16, pp.1-1, 2016.

T. Debroy, W. Zhang, J. Turner, and S. S. Babu, Building digital twins of 3D printing machines, Scr Mater, vol.135, pp.119-124, 2017.

G. L. Knapp, T. Mukherjee, and J. S. Zuback, Building blocks for a digital twin of additive manufacturing, Acta Mater, vol.135, pp.390-399, 2017.

S. Konstantinov, M. Ahmad, K. Ananthanarayan, and R. Harrison, The Cyber-physical Emachine Manufacturing System: Virtual Engineering for Complete Lifecycle Support, Procedia CIRP, vol.63, pp.119-124, 2017.

B. Rodi?, Industry 4.0 and the New Simulation Modelling Paradigm, Organizacija, vol.50, pp.193-207, 2017.

T. Uhlemann, C. Lehmann, and R. Steinhilper, The Digital Twin: Realizing the CyberPhysical Production System for Industry, 2017.

T. Uhlemann, C. Schock, and C. Lehmann, The Digital Twin: Demonstrating the Potential of Real Time Data Acquisition in Production Systems, Procedia Manuf, vol.9, pp.113-120, 2017.

J. Vachálek, L. Bartalský, and O. Rovný, The Digital Twin of an Industrial Production Line Within the Industry 4 . 0 Concept. 21st Int Conf Process Control, pp.258-262, 2017.

T. D. West and M. Blackburn, Is Digital Thread/Digital Twin Affordable? A Systemic Assessment of the Cost of DoD's Latest Manhattan Project, Procedia Comput Sci, vol.114, pp.47-56, 2017.