S. Hassfeld and J. Mühling, Computer assisted oral and maxillofacial surgery -A review and an assessment of technology, Int. J. Oral Maxillofac. Surg, vol.30, issue.1, pp.2-13, 2001.
DOI : 10.1054/ijom.2000.0024

J. Zhang, Customized titanium mesh for repairing cranial defects: A method with comprehensive evaluation, J. Craniofac. Surg, vol.26, issue.8, pp.758-761, 2015.
DOI : 10.1097/scs.0000000000002179

A. García, M. Á. Morey, M. Ramos, S. Janeiro, I. Molina et al., Reconstrucción de la articulación temporomandibular postraumática con prótesis a medida. Planificación quirúrgica virtual, Rev. Esp. Cir. Oral y Maxilofac, vol.33, issue.2, pp.53-60, 2011.

M. González-de-santiago, L. Chaurand, and B. Sandoval, Cranial reconstruction with a custom-made implant, Rev Esp Cir Oral Maxilofac, vol.3333, issue.1, pp.40-44, 2011.

F. Rengier, 3D printing based on imaging data: Review of medical applications, Int. J. Comput. Assist. Radiol. Surg, vol.5, issue.4, pp.335-341, 2010.

B. T. Goh and K. H. Teoh, Orbital implant placement using a computeraided design and manufacturing (CAD/CAM) stereolithographic surgical template protocol, Int. J. Oral Maxillofac. Surg, vol.44, issue.5, pp.642-648, 2015.
DOI : 10.1016/j.ijom.2014.11.017

M. W. Grieves and M. Tanniru, PLM, process, practice and provenance: knowledge provenance in support of business practices in Product Lifecycle Management, Int. J. Prod. Lifecycle Manag, vol.3, issue.1, p.37, 2008.

A. Saaksvuori and A. Immonen, Product Lifecycle Management, Third Edit, 2008.

F. Segonds, N. Maranzana, P. Veron, and A. Aoussat, Collaborative Reverse Engineering Design Experiment Using PLM Solutions, Int. J. Eng. Educ, vol.27, issue.5, pp.1037-1045, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00756511

J. Martínez, J. Sauza, F. Ricci, and P. Chiabert, Validation process model for product lifecycle management, Int. J. Prod. Lifecycle Manag, vol.7, issue.2/3, p.230, 2014.

F. Scott, W. Mcdonnell, and M. Burkett, Designing Medical Devices To Improve Patient Outcomes, 2011.

A. D. Lantada and P. L. Morgado, Introduction to Modern Product Development, Handbook on Advanced Design and Manufacturing Technologies for Biomedical Devices, pp.1-17, 2013.
DOI : 10.1007/978-1-4614-6789-2_1

J. Martínez, Visualization Model for Product Lifecycle Management: Processes, activities, roles and items involved in product lifecycle, 2013.

J. M. Martínez, Visualization Model for Product Lifecycle Management: Processes, activities, roles and items involved in product lifecycle, 2013.

A. Unkovskiy, S. Spintzyk, J. Brom, F. Huettig, and C. Keutel, Direct 3D printing of silicone facial prostheses: A preliminary experience in digital workflow, J. Prosthet. Dent, pp.1-6, 2018.

C. C. Pham, How to share complex data and knowledge: Application in Bio-Imaging, IFAC-PapersOnLine, vol.49, issue.12, pp.1098-1103, 2016.
DOI : 10.1016/j.ifacol.2016.07.589

M. Allanic, P. Hervé, A. Durupt, M. Joliot, P. Boutinaud et al., PLM as a strategy for the management of heterogeneous information in BioMedical Imaging field, Int. J. Inf. Technol. Manag, issue.1, pp.5-30, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01995060

T. Ngo, A. Bernard, and F. Belkadi, Interest of PLM for data sharing in the patient treatment process requiring prosthesis implantation, 15e Colloque National AIP-Priméca, pp.1-6, 2017.

G. Schuh, H. Rozenfeld, D. Assmus, and E. Zancul, Process oriented framework to support PLM implementation, Comput. Ind, vol.59, issue.2-3, pp.210-218, 2008.
DOI : 10.1016/j.compind.2007.06.015

J. Stark, Product Lifecycle Management, Third Edit, vol.2, 2016.

O. Labbi, L. Ouzizi, M. Douimi, and Y. Aoura, A Model to design a Product and its Extended Supply Chain integrating PLM (Product Lifecycle Management) Solution, Int. J. Sci. Eng. Res, vol.7, issue.10, pp.1190-1205, 2016.
DOI : 10.1109/iesm.2015.7380304

T. R. Kucklick, The Medical Device R&D Handbook, vol.21, 2005.
DOI : 10.1201/b13657

A. L. Jardini, Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing, J. Cranio-Maxillofacial Surg, vol.42, issue.8, pp.1877-1884, 2014.
DOI : 10.1016/j.jcms.2014.07.006

G. A. Aitchison, D. W. Hukins, J. J. Parry, D. E. Shepherd, and S. G. Trotman, A Review of the Design Process for Implantable Orthopedic Medical Devices, Open Biomed. Eng. J, vol.3, issue.1, pp.21-27, 2009.

D. Wu, J. Terpenny, and D. Schaefer, Digital design and manufacturing on the cloud: A review of software and services, Artif. Intell. Eng. Des. Anal. Manuf, vol.31, issue.1, pp.104-118, 2017.

T. Numajiri, H. Nakamura, Y. Sowa, and K. Nishino, Low-cost Design and Manufacturing of Surgical Guides for Mandibular Reconstruction Using a Fibula, Plast. Reconstr. Surg. -Glob. Open, vol.4, issue.7, p.805, 2016.