D. Ahlers, 3D Printing of Nonplanar Layers for Smooth Surface Generation, 2018.

M. Alexa, K. Hildebrand, and S. Lefebvre, Optimal discrete slicing, ACM Trans. Graph, vol.36, pp.1-16, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01660773

J. A. Robert, R. S. Allen, and . Trask, An experimental demonstration of effective Curved Layer Fused Filament Fabrication utilising a parallel deposition robot, Additive Manufacturing, vol.8, pp.78-87, 2015.

M. Attene, Shapes In a Box: Disassembling 3D Objects for Efficient Packing and Fabrication, Comput. Graph. Forum, vol.34, pp.64-76, 2015.

D. Chakraborty, B. Reddy, and A. R. Choudhury, Extruder Path Generation for Curved Layer Fused Deposition Modeling, Comput. Aided Des, vol.40, pp.235-243, 2008.

W. Cheng, J. Y. Fuh, A. Y. Nee, Y. S. Wong, H. T. Loh et al., Multiobjective optimization of part-building orientation in stereolithography, Rapid Prototyp J, vol.1, pp.12-23, 1995.

C. Dai, C. C. Wang, C. Wu, S. Lefebvre, G. Fang et al., Support-free Volume Printing by Multi-axis Motion, ACM Trans. Graph, vol.37, p.14, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01887571

A. Dolenc and I. Mäkelä, Slicing procedures for layered manufacturing techniques, Comput. Aided Des, vol.26, pp.119-126, 1994.

B. Ezair, S. Fuhrmann, and G. Elber, Volumetric covering print-paths for additive manufacturing of 3D models, Comput. Aided Des, vol.100, pp.1-13, 2018.

J. Gregson, A. Sheffer, and E. Zhang, All-Hex Mesh Generation via Volumetric PolyCube Deformation, Comput. Graph. Forum, vol.30, pp.1407-1416, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00766792

. Gurobi, Gurobi Optimizer Reference Manual, Gurobi Optimization, LLC, 2018.

T. Mohammad, B. Hayasi, and . Asiabanpour, A new adaptive slicing approach for the fully dense freeform fabrication (FDFF) process, Journal of Intelligent Manufacturing, vol.24, pp.683-694, 2013.

K. Hildebrand, B. Bickel, and M. Alexa, Orthogonal slicing for additive manufacturing, Shape Modeling International (SMI) Conference, vol.37, pp.669-675, 2013.

R. L. Hope, R. N. Roth, and P. A. Jacobs, Adaptive slicing with sloping layer surfaces, Rapid Prototyp J, vol.3, pp.89-98, 1997.

R. Hu, H. Li, H. Zhang, and D. Cohen-or, Approximate Pyramidal Shape Decomposition, ACM Trans. Graph, vol.33, p.12, 2014.

Y. Hu, Q. Zhou, X. Gao, A. Jacobson, D. Zorin et al., Tetrahedral Meshing in the Wild, ACM Trans. Graph, vol.37, p.14, 2018.

B. Huang and S. Singamneni, Alternate Slicing and Deposition Strategies for Fused Deposition Modelling of Light Curved Parts, J. of Achievements in Materials and Manufacturing Engineering, vol.55, pp.511-517, 2012.

B. Huang and S. Singamneni, A Mixed-Layer Approach Combining Both Flat and Curved Layer Slicing for Fused Deposition Modelling, Proceedings of the Institution of Mechanical Engineers, vol.229, pp.2238-2249, 2015.

Y. Huang, J. Zhang, X. Hu, G. Song, Z. Liu et al., FrameFab: Robotic Fabrication of Frame Shapes, ACM Trans. Graph, vol.35, p.11, 2016.

S. Keating and N. Oxman, Compound fabrication: A multi-functional robotic platform for digital design and fabrication, Robotics and Computer-Integrated Manufacturing, vol.29, pp.439-448, 2013.

P. Kulkarni and D. Dutta, An accurate slicing procedure for layered manufacturing, Comput. Aided Des, vol.28, pp.683-697, 1996.

S. Lim, A. Richard, . Buswell, J. Philip, D. Valentine et al., Modelling Curved-Layered Printing Paths for Fabricating Large-Scale Construction Components, 2016.

M. Livesu, S. Ellero, J. Martínez, S. Lefebvre, and M. Attene, From 3D models to 3D prints: an overview of the processing pipeline, Computer Graphics Forum, vol.36, issue.2, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01518469

L. Luo, I. Baran, S. Rusinkiewicz, and W. Matusik, Chopper: Partitioning Models into 3D-printable Parts, ACM Trans. Graph, vol.31, p.6, 2012.

K. Mani, D. Kulkarni, and . Dutta, Region-based adaptive slicing, Comput. Aided Des, vol.31, pp.317-333, 1999.

H. S. Masood, W. Rattanawong, and P. Iovenitti, Part Build Orientations Based on Volumetric Error in Fused Deposition Modelling, The International Journal of Advanced Manufacturing Technology, vol.16, pp.162-168, 2000.

S. Mueller, S. Im, S. Gurevich, A. Teibrich, L. Pfisterer et al., WirePrint: 3D Printed Previews for Fast Prototyping, Proceedings of the 27th Annual ACM Symposium on User Interface Software and Technology, pp.273-280, 2014.

Y. Pan, C. Zhou, Y. Chen, and J. Partanen, Multitool and multi-axis computer numerically controlled accumulation for fabricating conformal features on curved surfaces, Journal of Manufacturing Science and Engineering, vol.136, p.3, 2014.

. Pm-pandey, . Venkata-reddy, and . Sanjay-g-dhande, Slicing procedures in layered manufacturing: a review, Rapid Prototyp J, vol.9, pp.274-288, 2003.

H. Peng, R. Wu, S. Marschner, and F. Guimbretière, OnThe-Fly Print: Incremental Printing While Modelling, Proceedings of the 2016 CHI Conference on Human Factors in Computing Systems, 2016.

E. Sabourin, A. Scott, J. H. Houser, and . Bøhn, Adaptive slicing using stepwise uniform refinement, Rapid Prototyp J, vol.2, pp.20-26, 1996.

E. Sabourin, S. A. Houser, and J. H. Bøhn, Accurate exterior, fast interior layered manufacturing, Rapid Prototyp J, vol.3, pp.44-52, 1997.

S. Singamneni, A. Roychoudhury, O. Diegel, and B. Huang, Modeling and evaluation of curved layer fused deposition, Journal of Materials Processing Technology, vol.212, pp.27-35, 2012.

H. Song, N. Ray, D. Sokolov, and S. Lefebvre, Anti-aliasing for Fused Filament Deposition, Comput. Aided Des, vol.89, pp.25-34, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01400686

P. Song, B. Deng, Z. Wang, Z. Dong, W. Li et al., CofiFab: Coarse-to-fine Fabrication of Large 3D Objects, ACM Trans. Graph, vol.35, p.11, 2016.

K. Tata, G. Fadel, A. Bagchi, and N. Aziz, Efficient slicing for layered manufacturing, Rapid Prototyp J, vol.4, pp.151-167, 1998.

L. Thomas, A. Robert, and T. Richard, Curved layer fused filament fabrication using automated tool-path generation, 3D Printing and Additive Manufacturing, vol.3, pp.236-243, 2016.

K. Thrimurthulu, M. Pulak, N. Pandey, and . Reddy, Optimum part deposition orientation in fused deposition modeling, International Journal of Machine Tools and Manufacture, vol.44, pp.585-594, 2004.

J. Tyberg and J. H. Bøhn, Local Adaptive Slicing, Rapid Prototyp J, vol.4, pp.118-127, 1998.

J. Tyberg and J. H. Bøhn, FDM systems and local adaptive slicing, Materials & design, vol.20, pp.77-82, 1999.

N. Umetani and R. Schmidt, Cross-sectional Structural Analysis for 3D Printing Optimization, SIGGRAPH Asia 2013 Technical Briefs (SA '13), vol.5, pp.1-5, 2013.

W. Wang, H. Chao, J. Tong, Z. Yang, X. Tong et al., Saliency-Preserving Slicing Optimization for Effective 3D Printing, Comput. Graph. Forum, vol.34, pp.148-160, 2015.

M. Wang, C. Zanni, and L. Kobbelt, Improved Surface Quality in 3D Printing by Optimizing the Printing Direction, Proceedings of the 37th Annual Conference of the European Association for Computer Graphics (EG '16, pp.59-70, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01997599

C. Wu, C. Dai, G. Fang, Y. Liu, and C. C. Wang, RoboFDM: a robotic system for support-free fabrication using FDM, Proceedings of IEEE International Conference on Robotics and Automation, 2017.

R. Wu, H. Peng, F. Guimbretière, and S. Marschner, Printing Arbitrary Meshes with a 5DOF Wireframe Printer, ACM Trans. Graph, vol.35, issue.9, pp.1-101, 2016.

X. Zhang, X. Le, A. Panotopoulou, E. Whiting, and C. C. Wang, Perceptual Models of Preference in 3D Printing Direction, ACM Trans. Graph, vol.34, p.12, 2015.