S. Allen and D. Dutta, Determination and evaluation of support structures in layered manufacturing, JOURNAL OF DESIGN AND MANUFACTURING, vol.5, pp.153-162, 1995.

A. Armani, W. Li, M. Leu, and G. Hilmas, A novel extrusion-based additive manufacturing process for ceramic parts, Proceedings of the 27th Annual Conference on Solid Freeform Fabrication, pp.1519-1529, 2016.

M. Bergou, B. Audoly, E. Vouga, M. Wardetzky, and E. Grinspun, Discrete Viscous Threads, ACM Trans. Graph, vol.29, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01898149

R. A. Buswell, W. R. Leal-da, S. Z. Silva, J. Jones, and . Dirrenberger, 3D printing using concrete extrusion: A roadmap for research, Cement and Concrete Research, vol.112, pp.37-49, 2018.

K. Chalasani and L. Roscoe, Support Generation for Fused Deposition Modeling, Proc. of Solid Freeform Fabrication Symposium '95, pp.229-241, 1995.

Z. Chen, Z. Li, J. Li, C. Liu, C. Lao et al., 3D printing of ceramics: A review, Journal of the European Ceramic Society, 2018.

J. J. Cox, Y. Takezaki, R. P. Helaman, K. E. Ferguson, E. L. Kohkonen et al., Space-filling curves in tool-path applications, Computer-Aided Design, vol.26, pp.215-224, 1994.

C. Dai, C. C. Wang, C. Wu, S. Lefebvre, G. Fang et al., Support-free Volume Printing by Multi-axis Motion, ACM Trans. Graph, vol.37, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01887571

D. Ding, (. Zengxi, D. Stephen)-pan, H. Cuiuri, and . Li, A toolpath generation strategy for wire and arc additive manufacturing, The International Journal of Advanced Manufacturing Technology, vol.73, pp.173-183, 2014.

J. Dumas, J. Hergel, and S. Lefebvre, Bridging the Gap: Automated Steady Scaffoldings for 3D Printing, ACM Trans. Graph, vol.33, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01100737

C. Fleming, S. Walker, C. Branyan, A. Nicolai, G. Hollinger et al., Toolpath Planning for Continuous Extrusion Additive Manufacturing, 2017.

. Google, Google OR Tools, 2018.

C. Gosselin, R. Duballet, P. Roux, N. Gaudillière, J. Dirrenberger et al., Large-scale 3D printing of ultra-high performance concrete â?? a new processing route for architects and builders, Materials and Design, vol.100, pp.102-109, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01383481

F. Händle, Extrusion in Ceramics, 2007.

J. Hergel and S. Lefebvre, Clean color: Improving multi-filament 3D prints, Computer Graphics Forum, vol.33, pp.469-478, 2014.

S. Hornus and S. Lefebvre, Iterative Carving for Self-supporting 3D Printed Cavities, Proceedings of the 39th Annual European Association for Computer Graphics Conference: Short Papers (EG). Eurographics Association, pp.41-44, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01764291

S. Hornus, S. Lefebvre, J. Dumas, and F. Claux, Tight Printable Enclosures and Support Structures for Additive Manufacturing, Proceedings of the Eurographics Workshop on Graphics for Digital Fabrication (GraD-iFab '16). Eurographics Association, pp.11-21, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01399931

Y. Huang, J. Zhang, X. Hu, G. Song, Z. Liu et al., FrameFab: Robotic Fabrication of Frame Shapes, ACM Trans. Graph, vol.35, p.224, 2016.

T. Langlois, A. Shamir, D. Dror, W. Matusik, and D. I. Levin, Stochastic Structural Analysis for Context-aware Design and Fabrication, 2016.

, ACM Trans. Graph, vol.35, p.226, 2016.

L. Lu, A. Sharf, H. Zhao, Y. Wei, Q. Fan et al., Build-to-last: Strength to Weight 3D Printed Objects, ACM Trans. Graph, vol.33, p.97, 2014.

F. Mezzadri, V. Bouriakov, and X. Qian, Topology optimization of self-supporting support structures for additive manufacturing, Additive Manufacturing, vol.21, pp.666-682, 2018.

S. Mueller, S. Im, S. Gurevich, A. Teibrich, L. Pfisterer et al., WirePrint: 3D Printed Previews for Fast Prototyping, Proceedings of the 27th Annual ACM Symposium on User Interface Software and Technology (UIST '14), pp.273-280, 2014.

C. Oztireli, G. Guennebaud, and M. Gross, Feature Preserving Point Set Surfaces based on Non-Linear Kernel Regression, Computer Graphics Forum, 2009.
URL : https://hal.archives-ouvertes.fr/inria-00354969

R. Schmidt and N. Umetani, Branching support structures for 3D printing, SIGGRAPH Studio. ACM, vol.9, p.1, 2014.

O. Stava, J. Vanek, B. Benes, N. Carr, and R. M?ch, Stress Relief: Improving Structural Strength of 3D Printable Objects, ACM Trans. Graph, vol.31, 2012.

G. Strano, . Liang, R. M. Hao, K. E. Everson, and . Evans, A new approach to the design and optimisation of support structures in additive manufacturing, The International Journal of Advanced Manufacturing Technology, vol.66, pp.1247-1254, 2013.

J. Sun, W. Zhou, L. Yan, D. Huang, and L. Lin, Extrusionbased food printing for digitalized food design and nutrition control, Journal of Food Engineering, vol.220, pp.1-11, 2018.

T. Tricard, F. Claux, and S. Lefebvre, Ribbed Support Vaults for 3D Printing of Hollowed Objects, Computer Graphics Forum, vol.0, p.0, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02155929

N. Umetani and R. Schmidt, Cross-sectional Structural Analysis for 3D Printing Optimization, SIGGRAPH Asia 2013 Technical Briefs (SA '13), 2013.

. Ranji, J. Vaidyanathan, J. L. Walish, S. Lombardi, P. W. Kasichainula et al., The extrusion freeforming of functional ceramic prototypes, JOM, vol.52, pp.34-37, 2000.

J. Vanek, Clever Support: Efficient Support Structure Generation for Digital Fabrication, Proceedings of the Symposium on Geometry Processing (SGP '14). Eurographics Association, pp.117-125, 2014.

W. Wang, Y. Liu, J. Wu, S. Tian, C. C. Wang et al., Support-Free Hollowing, TVCG, vol.24, pp.2787-2798, 2018.

W. Wang, Y. Tuanfeng, Z. Wang, L. Yang, X. Liu et al., Cost-effective Printing of 3D Objects with Skin-frame Structures, ACM Trans. Graph, vol.32, p.177, 2013.

C. Wu, C. Dai, G. Fang, Y. Liu, and C. C. Wang, RoboFDM: A robotic system for support-free fabrication using FDM, 2017 IEEE International Conference on Robotics and Automation (ICRA). 1175-1180, 2017.

J. Wu, N. Aage, R. Üdiger-westermann, and O. Sigmund, Infill Optimization for Additive Manufacturingâ??Approaching Bone-Like Porous Structures, IEEE Transactions on Visualization and Computer Graphics, vol.24, issue.2, pp.1127-1140, 2018.

J. Wu, C. C. Wang, X. Zhang, and R. Westermann, Selfsupporting rhombic infill structures for additive manufacturing, Computer-Aided Design, vol.80, pp.32-42, 2016.

R. Wu, H. Peng, F. Guimbretière, and S. Marschner, Printing Arbitrary Meshes with a 5DOF Wireframe Printer, ACM Trans. Graph, vol.35, 2016.

Y. Yang, H. T. Loh, J. F. , Y. Hsi, and Y. G. Wang, Equidistant path generation for improving scanning efficiency in layered manufacturing, Rapid Prototyping Journal, vol.8, pp.30-37, 2002.

J. Zehnder, S. Coros, and B. Thomaszewski, Designing Structurally-sound Ornamental Curve Networks, Article, vol.35, pp.1-99, 2016.

J. Zehnder, E. Knoop, M. Bächer, and B. Thomaszewski, Metasilicone: design and fabrication of composite silicone with desired mechanical properties, ACM Trans. Graph, vol.36, issue.6, pp.1-240, 2017.

X. Zhang, X. Le, A. Panotopoulou, E. Whiting, and C. C. Wang, Perceptual Models of Preference in 3D Printing Direction, ACM Trans. Graph, vol.34, p.215, 2015.

H. Zhao, F. Gu, Q. Huang, J. Garcia, Y. Chen et al., Connected Fermat Spirals for Layered Fabrication, ACM Trans. Graph, vol.35, 2016.

H. Zhao, H. Zhang, S. Xin, Y. Deng, C. Tu et al., DSCarver: Decompose-and-spiral-carve for Subtractive Manufacturing, ACM Trans. Graph, vol.37, 2018.

Q. Zhou, J. Panetta, and D. Zorin, Worst-case Structural Analysis, ACM Trans. Graph, vol.32, 2013.

A. Zocca, P. Colombo, C. M. Gomes, and J. Gãijnster, Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities, Journal of the American Ceramic Society, vol.98, pp.1983-2001, 2015.