J. P. Merlet, Les Robots Parallèles. Hermès, 1997.

J. Wang and O. Masory, On the accuracy of a Stewart platform -Part I : The effect of manufacturing tolerances, Proc. of ICRA93, pp.114-120, 1993.

L. Tancredi, M. Teillaud, and J. Merlet, Forward kinematics of a parallel manipulator with additional rotary sensors measuring the position of platform joints, Computational Kinematics, pp.261-270, 1995.

D. Daney, Etalonnage géométrique des robots parallèles, 2000.

C. Wampler and T. Arai, Calibration of robots having kinematic closed loops using non-linear leastsquares estimation, IFToMM, pp.153-158, 1992.

H. Zhuang, Self-calibration of parallel mechanisms with a case study on Stewart platforms, IEEE Trans. on Robotics and Automation, vol.13, issue.3, pp.387-397, 1997.

F. Marquet, O. Company, S. Krut, and F. Pierrot, Enhancing parallel robots accuracy with redundant sensors, Proc. of ICRA02, 2002.
URL : https://hal.archives-ouvertes.fr/lirmm-00269420

D. Daney, Self calibration of Gough platform using leg mobility constraints, Proc of the 10 th world congress on the theory of machine and mechanisms, pp.104-109, 1999.
URL : https://hal.archives-ouvertes.fr/hal-00906476

Z. Geng and L. S. Haynes, An effective kinematics calibration method for Stewart platform, Proc. of Fifth International Symposium on Robotics and Manufacturing, pp.87-92, 1994.

W. Khalil and S. Besnard, Self calibration of Stewart-Gough parallel robots without extra sensors, IEEE Trans. on Robotics and Automation, pp.1758-1763, 1999.

H. Zhuang and Z. S. Roth, Method for kinematic calibration of Stewart platforms, J. of Robotic Systems, vol.10, issue.3, pp.391-405, 1993.

H. Zhuang, J. Yan, and O. Masory, Calibration of Stewart platforms and other parallel manipulators by minimizing inverse kinematic residuals, J. of Robotic Systems, vol.15, issue.7, pp.395-405, 1998.

H. Zhuang, O. Masory, and J. Yan, Kinematic calibration of a Stewart platform using pose measurements obtained by a single theodolite, Proc. of IROS95, pp.329-334, 1995.

Z. J. Geng and L. S. Haynes, A "3-2-1" kinematic configuration of a Stewart platform and its application to six degrees of freedom pose measurements, Robotics and Computer-Integrated Manufacturing, vol.11, issue.1, pp.23-34, 1994.

G. Fried, K. Djouani, Y. Amirat, and C. François, A 3-d sensor for parallel robot calibration. a parameter perturbation analysis, Recent Advances in Robot Kinematics, pp.451-460, 1996.

P. Vischer and R. Clavel, Kinematic calibration of the parallel delta robot, Robotica, vol.16, pp.207-218, 1998.

P. Renaud, N. Andreff, M. Dhome, and P. Martinet, Experimental evaluation of a vision-based measuring device for parallel machine-tool calibration, Proc. of IROS02, 2002.
URL : https://hal.archives-ouvertes.fr/hal-02466325

J. M. Lavest and M. Dhome, Comment calibrer des objectifsà très courte focale, Actes de Reconnaissance des Formes et Intelligence Artificielle (RFIA2000), pp.81-90, 2000.

W. Khalil, M. Gautier, and C. Enguehard, Identifiable parameters and optimum configurations for robots calibration, Robotica, vol.9, pp.63-70, 1991.

M. A. Meggiolaro and S. Dubowsky, An analytical method to eliminate the redundant parameters in robot calibration, Proceedings of the 2000 IEEE International Conference on Robotics and Automation, pp.3609-3615, 2000.

S. Besnard and W. Khalil, Identifiable parameters for parallel robots kinematic calibration, Proc of the 2001 IEEE Int Conf on Robotics and Automation, pp.2859-2866, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00401752

H. Zhuang and Z. S. Roth, Camera-Aided Robot Calibration, 1996.

F. Pierrot, F. Marquet, O. Company, and T. Gil, H4 parallel robot : Modeling, design and preliminary experiments, Proc. of ICRA01, pp.3256-3261, 2001.

O. Company, Machines-outils rapidesà structure parallèle. Méthodologie de conception, applications et nouveaux concepts, 2000.

P. Visher, Improve the Accuracy of Parallel Robot, 1996.