N. Aage, E. Andreassen, S. Boyan, O. Lazarov, and . Sigmund, Giga-voxel computational morphogenesis for structural design, Nature, vol.550, p.84, 2017.

E. Andreassen and C. Schousboe-andreasen, How to Determine Composite Material Properties Using Numerical Homogenization, Computational Materials Science, vol.83, pp.488-495, 2014.

M. Ashby, The properties of foams and lattices, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.364, pp.15-30, 2006.

G. Boittin, D. Garajeu, A. Labé, H. Moulinec, F. Silva et al., , 2014.

D. Bommes, B. Lévy, N. Pietroni, E. Puppo, C. Silva et al., Quad-Mesh Generation and Processing: A Survey, Comput. Graph. Forum, vol.32, pp.51-76, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01059755

J. Brennan-craddock, The Investigation of a Method to Generate Conformal Lattice Structures for Additive Manufacturing, 2011.

Y. Chen, 3d texture mapping for rapid manufacturing, Computer-Aided Design and Applications, vol.4, pp.761-771, 2007.

, Zuenko Evgeny and Matthias Harders. 2019. Wrinkles, Folds, Creases, Buckles: Small-Scale Surface Deformations as Periodic Functions on 3D Meshes. IEEE Transactions on Visualization and Computer Graphics PP, pp.1-1, 2019.

L. M. Marc, L. François, M. Chen, and . Coret, Elasticity and symmetry of triangular lattice materials, International Journal of Solids and Structures, vol.129, pp.18-27, 2017.

O. Fryazinov, T. Vilbrandt, and A. Pasko, Multi-Scale Space-Variant FRep Cellular Structures, Computer-Aided Design, vol.45, pp.26-34, 2013.

R. Gaillac, P. Pullumbi, and F. Coudert, ELATE: an opensource online application for analysis and visualization of elastic tensors, Journal of Physics: Condensed Matter, vol.28, p.275201, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02310193

X. Gao, W. Jakob, M. Tarini, and D. Panozzo, Robust Hex-Dominant Mesh Generation Using Field-Guided Polyhedral Agglomeration, ACM Transactions on Graphics, vol.36, 2017.

P. Geoffroy-donders, G. Allaire, and O. Pantz, 2020. 3-d topology optimization of modulated and oriented periodic microstructures by the homogenization method, J. Comput. Phys, vol.401, p.108994, 2020.

J. Lorna, M. Gibson, and . Ashby, Cellular solids: structure and properties, 1999.

A. Goldberg, M. Zwicker, and F. Durand, Anisotropic Noise, ACM Trans. Graph, vol.27, pp.1-8, 2008.

J. Groen, F. Stutz, N. Aage, J. A. Baerentzen, and O. Sigmund, De-homogenization of optimal multi-scale 3D topologies, 2019.

A. Ion, J. Frohnhofen, L. Wall, R. Kovacs, M. Alistar et al., Metamaterial Mechanisms, Proceedings of the 29th Annual Symposium on User Interface Software and Technology -UIST '16, pp.529-539, 2016.

W. Jakob, M. Tarini, D. Panozzo, and O. Sorkine-hornung, Proceedings of SIGGRAPH ASIA), vol.34, 2015.

W. Jakob, M. Tarini, D. Panozzo, and O. Sorkine-hornung, stant Field-Aligned Meshes, vol.34, 2015.

F. Knöppel, K. Crane, U. Pinkall, and P. Schröder, Stripe Patterns on Surfaces, ACM Trans. Graph, vol.34, p.4, 2015.

T. Kuipers, J. Wu, and C. C. Wang, CrossFill: Foam Structures with Graded Density for Continuous Material Extrusion, Computer-Aided Design, vol.114, pp.37-50, 2019.

A. Lagae, S. Lefebvre, R. Cook, T. Derose, G. Drettakis et al., A Survey of Procedural Noise Functions, Computer Graphics Forum, vol.29, pp.2579-2600, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00920177

A. Lagae, S. Lefebvre, R. Cook, T. Derose, G. Drettakis et al., Ken Perlin, and Matthias Zwicker. 2010b. A Survey of Procedural Noise Functions, vol.29, 2010.

A. Lagae, S. Lefebvre, G. Drettakis, and P. Dutré, Procedural Noise Using Sparse Gabor Convolution, ACM Trans. Graph, vol.28, issue.10, pp.1-54, 2009.
URL : https://hal.archives-ouvertes.fr/inria-00606821

A. Lagae, S. Lefebvre, G. Drettakis, and P. Dutré, Procedural Noise using Sparse Gabor Convolution, Proceedings of ACM SIGGRAPH, vol.28, pp.54-64, 2009.
URL : https://hal.archives-ouvertes.fr/inria-00606821

J. P. Lewis, Algorithms for Solid Noise Synthesis, Proceedings of the 16th Annual Conference on Computer Graphics and Interactive Techniques (SIGGRAPH '89), pp.263-270, 1989.

D. Li, N. Dai, X. Jiang, and X. Chen, Interior Structural Optimization Based on the Density-Variable Shape Modeling of 3D Printed Objects, The International Journal of Advanced Manufacturing Technology, vol.83, pp.137-149, 2015.

M. Livesu, S. Ellero, J. Martínez, S. Lefebvre, and M. Attene, From 3D Models to 3D Prints: An Overview of the Processing Pipeline, Computer Graphics Forum, vol.36, pp.537-564, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01518469

S. K. Maiti, M. F. Ashby, and L. J. Gibson, Fracture toughness of brittle cellular solids, Scripta Metallurgica, vol.18, issue.84, pp.90510-90516, 1984.

J. Martínez, J. Dumas, and S. Lefebvre, Procedural Voronoi Foams for Additive Manufacturing, ACM Trans. Graph, vol.35, 2016.

J. Martínez, S. Hornus, H. Song, and S. Lefebvre, Polyhedral Voronoi diagrams for additive manufacturing, ACM Transactions on Graphics, vol.37, p.15, 2018.

J. Martínez, H. Song, J. Dumas, and S. Lefebvre, Orthotropic k-nearest foams for additive manufacturing, ACM Transactions on Graphics, vol.36, issue.4, 2017.

A. Medeiros-e-sá, K. R. Vinícius-moreira-mello, D. Echavarria, and . Covill, Adaptive voids, The Visual Computer, vol.31, pp.799-808, 2015.

F. Neyret and E. Heitz, Understanding and controlling contrast oscillations in stochastic texture algorithms using Spectrum of Variance, Research Report. LJK / Grenoble University -INRIA, vol.8, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01349134

J. Panetta, A. Rahimian, and D. Zorin, Worst-case Stress Relief for Microstructures, ACM Transactions on Graphics, vol.36, 2017.

J. Panetta, Q. Zhou, L. Malomo, N. Pietroni, P. Cignoni et al., Elastic Textures for Additive Fabrication, ACM Trans. Graph, vol.34, 2015.

O. Pantz and K. Trabelsi, A Post-Treatment of the Homogenization Method for Shape Optimization, SIAM Journal on Control and Optimization, vol.47, pp.1380-1398, 2008.

A. Pasko, O. Fryazinov, T. Vilbrandt, P. Fayolle, and V. Adzhiev, Procedural function-based modelling of volumetric microstructures, Graphical Models, vol.73, pp.165-181, 2011.

, Freely orientable microstructures for designing deformable 3D prints ? 19

M. Pham, C. Liu, I. Todd, and J. Lertthanasarn, Damagetolerant architected materials inspired by crystal microstructure, Nature, vol.565, p.305, 2019.

N. Ray, W. C. Li, B. Lévy, A. Sheffer, and P. Alliez, Periodic Global Parameterization, ACM Transactions on Graphics, 2006.
URL : https://hal.archives-ouvertes.fr/inria-00104853

C. Schumacher, B. Bickel, J. Rys, S. Marschner, C. Daraio et al., Microstructures to Control Elasticity in 3D Printing, ACM Trans. Graph, vol.34, issue.13, pp.1-136, 2015.

C. Schumacher, S. Marschner, M. Cross, and B. Thomaszewski, Mechanical Characterization of Structured Sheet Materials, ACM Trans. Graph, vol.37, p.148, 2018.

M. G. Tarantino, O. Zerhouni, and K. Danas, Random 3D-printed isotropic composites with high volume fraction of pore-like polydisperse inclusions and near-optimal elastic stiffness, Acta Materialia, vol.175, pp.331-340, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02167837

V. Tavernier, F. Neyret, R. Vergne, and J. Thollot, Making Gabor Noise Fast and Normalized, The Eurographics Association, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02104389

T. Tricard, S. Efremov, C. Zanni, F. Neyret, J. Martínez, Procedural Phasor Noise, ACM Transactions on Graphics, pp.1-13, 2019.
DOI : 10.1145/3306346.3322990
URL : https://hal.inria.fr/hal-02118508

K. Vidim?e, S. Wang, J. Ragan-kelley, and W. Matusik, OpenFab: A Programmable Pipeline for Multi-material Fabrication, ACM Trans. Graph, vol.32, p.12, 2013.

H. Wang, Y. Chen, and D. W. Rosen, A hybrid geometric modeling method for large scale conformal cellular structures, ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp.421-427, 2005.

J. Wu, N. Aage, R. Westermann, and O. Sigmund, Infill Optimization for Additive Manufacturing-Approaching Bone-Like Porous Structures. arXiv, 2016.

J. Wu, C. C. Wang, X. Zhang, and R. Westermann, Selfsupporting rhombic infill structures for additive manufacturing, Computer-Aided Design, vol.80, pp.32-42, 2016.

J. Wu, W. Wang, and X. Gao, Design and Optimization of Conforming Lattice Structures, IEEE Transactions on Visualization and Computer Graphics, 2019.

B. Zhu, M. Skouras, D. Chen, and W. Matusik, Two-Scale Topology Optimization with Microstructures, ACM Trans. Graph, vol.36, 2017.