B. Wittenmark, J. Nilsson, and M. Törngren, Timing problems in real-time control systems, Proceedings of 1995 American Control Conference, ACC'95, pp.2000-2004, 1995.
DOI : 10.1109/ACC.1995.531240

M. Törngren, Fundamentals of Implementing Real-Time Control Applications in Distributed Computer Systems, Real- Time Systems, vol.14, issue.3, pp.219-250, 1998.
DOI : 10.1007/978-0-585-35223-7_2

K. Årzén, A. Cervin, J. Eker, and L. Sha, An introduction to control and scheduling co-design, Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187), 2000.
DOI : 10.1109/CDC.2001.914701

R. Bosch, Can specification version 2.0, 1991.

R. I. Davis, A. Burns, R. J. Bril, and J. J. Lukkien, Controller Area Network (CAN) schedulability analysis: Refuted, revisited and revised, Real-Time Systems, vol.3, issue.8, pp.239-272, 2007.
DOI : 10.1007/s11241-007-9012-7

M. Grenier and N. Navet, Fine-tuning mac-level protocols for optimized real-time quality-of-service, 2007.
URL : https://hal.archives-ouvertes.fr/inria-00158172

T. Nolte, M. Nolin, and H. Hansson, Real-Time Server-Based Communication With CAN, IEEE Transactions on Industrial Informatics, vol.1, issue.3, pp.192-201, 2005.
DOI : 10.1109/TII.2005.852074

G. Cena and A. Valenzano, Achieving round-robin access in controller area networks, IEEE Transactions on Industrial Electronics, vol.49, issue.6, pp.1202-1213, 2002.
DOI : 10.1109/TIE.2002.804968

A. Meschi, M. D. Natale, and M. Spuri, Earliest deadline message scheduling with limited priority inversion, Proceedings of the 4th International Workshop on Parallel and Distributed Real-Time Systems, pp.87-94, 1996.
DOI : 10.1109/WPDRTS.1996.557464

M. D. Natale, Scheduling the CAN bus with earliest deadline techniques, Proceedings 21st IEEE Real-Time Systems Symposium, pp.259-268, 2000.
DOI : 10.1109/REAL.2000.896015

M. D. Natale and A. Meschi, Scheduling messages with Earliest Deadline techniques, Real-Time Systems, vol.20, issue.3, pp.255-285, 2001.
DOI : 10.1023/A:1008177218257

P. Pedreiras and L. Almeida, Flexible scheduling on Controller Area Network, Proc. of the 10th International Conference on Real-Time Systems, 2002.
DOI : 10.1049/cce:20020402

S. Cavalieri, Meeting Real-Time Constraints in CAN, IEEE Transactions on Industrial Informatics, vol.1, issue.2, pp.124-135, 2005.
DOI : 10.1109/TII.2005.844429

. Cia, CAN application layer for industrial applications: CAN in the OSI reference model, 1996.

. Cia, CAL-Based communication profile for industrial systems-CANOpen, 1996.

T. Nolte, H. Hansson, and C. Norström, Minimizing CAN response-time jitter by message manipulation, Proceedings. Eighth IEEE Real-Time and Embedded Technology and Applications Symposium, pp.197-206, 2002.
DOI : 10.1109/RTTAS.2002.1137394

F. Coutinho, J. Fonseca, J. Barreiros, and E. Costa, Using genetic algorithms to reduce jitter in control variables transmitted over CAN, Proc. of the 7th International CAN Conference, 2000.

J. Barreiros, E. Costa, J. Fonseca, and F. Coutinho, Jitter reduction in a real-time message transmission system using genetic algorithms, Proceedings of the 2000 Congress on Evolutionary Computation. CEC00 (Cat. No.00TH8512), 2000.
DOI : 10.1109/CEC.2000.870769

L. David, F. Cottet, and N. Nissanke, Jitter control in on-line scheduling of dependent real-time tasks, Proceedings 22nd IEEE Real-Time Systems Symposium (RTSS 2001) (Cat. No.01PR1420), pp.49-58, 2001.
DOI : 10.1109/REAL.2001.990595

K. Jeffay, D. Stanat, and C. Martel, On non-preemptive scheduling of periodic and sporadic tasks, Proc. of the 12th IEEE Real-time Systems Symposium (RTSS 1991), pp.129-139, 1991.

J. Migge, Scheduling under Real-Time Constraints: a Trajectory Based Model, 1999.

K. Zuberi and K. Shin, Non-preemptive scheduling of messages on controller area network for real-time control applications, Proceedings Real-Time Technology and Applications Symposium, pp.240-249, 1995.
DOI : 10.1109/RTTAS.1995.516221

L. George, N. Rivierre, and M. Spuri, Preemptive and non-preemptive real-time uniprocessor scheduling, 1996.
URL : https://hal.archives-ouvertes.fr/inria-00073732

J. A. Stankovic, M. Spuri, K. Ramamritham, and G. C. Buttazzo, Deadline Scheduling for Real-Time Systems EDF and Related Algorithms, 1998.

M. Spuri, Analysis of deadline scheduling in real-time systems, 1996.

L. Schrage, Letter to the Editor???A Proof of the Optimality of the Shortest Remaining Processing Time Discipline, Operations Research, vol.16, issue.3, pp.687-690, 1968.
DOI : 10.1287/opre.16.3.687

D. Smith, Technical Note???A New Proof of the Optimality of the Shortest Remaining Processing Time Discipline, Operations Research, vol.26, issue.1, pp.197-199, 1976.
DOI : 10.1287/opre.26.1.197

D. P. Bunde, SPT is optimally competitive for uniprocessor flow, Information Processing Letters, vol.90, issue.5, pp.233-238, 2004.
DOI : 10.1016/j.ipl.2004.02.013

K. J. Åström and B. Wittenmark, Computer-Controlled Systems, 1997.

M. Ohlin, D. Henriksson, and A. Cervin, TrueTime 1.5 Reference Manual, 2007.

K. J. Åström and T. Hägglund, Advanced PID Control. Research Triangle Park, 2005.

J. Migge, A. Jean-marie, and N. Navet, Timing analysis of compound scheduling policies : Application to Posix1003.1b, Journal of Scheduling, vol.6, issue.5, pp.457-482, 2003.
DOI : 10.1023/A:1024806606443
URL : https://hal.archives-ouvertes.fr/inria-00099506

M. G. Harbour and J. C. Palencia, Response time analysis for tasks scheduled under EDF within fixed priorities IEEE Computer Society, 2003. encoding), frames which have distinct deadlines can belong to the same slot and an inversion of priority may occur, Proc. of the 24th IEEE International Real-Time Systems Symposium, 2003.