K. K. Ahn and N. B. Kha, Internal model control for shape memory alloy actuators using fuzzy based Preisach model. Sensors and Actuators A 18, pp.141-152, 2007.

K. H. Ang, G. Chong, and Y. Li, PID control system analysis, design and technology, IEEE transactions on control systems technology, vol.13, issue.4, pp.559-526, 2005.

A. Chirani, S. Aleong, D. Dumont, C. Mcdowell, D. Patoor et al., Superelastic behavior modeling in shape memory alloys, Journal de Physique IV (Proceedings), vol.112, pp.205-208, 2003.
DOI : 10.1051/jp4:2003866

?. Aström, K. J. Hägglund, T. K. Hägglund, and T. , The future of PID control, PID Controllers: Theory, Design, and Tuning, pp.1163-1175, 1995.
DOI : 10.1016/S0967-0661(01)00062-4

?. Aström, K. J. Hägglund, and T. , Advanced PID Control. ISA -The Instrumentation , Systems, and Automation Society, 2005.

E. Asua, V. Etxebarria, and A. Garcia-arribas, Neural network-based micropositioning control of smart shape memory alloy actuators, Engineering Applications of Artificial Intelligence, vol.21, issue.5, pp.796-804, 2008.
DOI : 10.1016/j.engappai.2007.07.003

H. Benzaoui, N. Chaillet, C. Lexcellent, and A. Bourjault, Nonlinear motion and force control of shape memory alloy actuators. Smart structures and materials 3667, pp.337-348, 1999.

C. Bouvet, S. Calloch, and C. Lexcellent, A phenomenological model for pseudoelasticity of shape memory alloys under multiaxial proportional and nonproportional loadings, European Journal of Mechanics - A/Solids, vol.23, issue.1, pp.37-61, 2004.
DOI : 10.1016/j.euromechsol.2003.09.005

M. Calin, A. Bertsch, N. Chaillet, S. Zissi, S. Ballandras et al., Microrobots realized by microstereophotolithography and actuated byshape memory alloys, Proceedings of the 1997 IEEE/RSJ Intelligent Robots and Systems, pp.33-34, 1997.

D. Silva and E. P. , Beam shape feedback control by means of a shape memory actuator, Materials & Design, vol.28, issue.5, pp.1592-1596, 2007.
DOI : 10.1016/j.matdes.2006.02.021

S. M. Dutta, F. H. Ghorbel, and J. B. Dabney, Modeling and Control of a Shape Memory Alloy Actuator, Proceedings of the 2005 IEEE International Symposium on, Mediterrean Conference on Control and Automation Intelligent Control, 2005., pp.1007-1012, 2005.
DOI : 10.1109/.2005.1467151

M. Fliess and C. Join, MODEL-FREE CONTROL AND INTELLIGENT PID CONTROLLERS: TOWARDS A POSSIBLE TRIVIALIZATION OF NONLINEAR CONTROL?, 15th IFAC Symposium on System Identification, 2009.
DOI : 10.3182/20090706-3-FR-2004.00256
URL : https://hal.archives-ouvertes.fr/inria-00372325

M. Fliess, C. Join, M. Mboup, and H. Sira-ram-`-ram-`-irez, Vers une commande multivariable sans modèle, Proc. Conférence internationale francophone d'automatique (CIFA'06), 2006.

M. Fliess, C. Join, and H. Sira-ramírez, Non-linear estimation is easy, International Journal of Modelling, Identification and Control, vol.4, issue.1, p.41, 2008.
DOI : 10.1504/IJMIC.2008.020996
URL : https://hal.archives-ouvertes.fr/inria-00158855

M. Fliess, J. Lévine, P. Martin, and P. Rouchon, Flatness and defect of non-linear systems: introductory theory and examples, International Journal of Control, vol.4, issue.6, pp.1327-1361, 1995.
DOI : 10.1109/9.73561

P. Gédouin, C. Join, E. Delaleau, J. Bourgeot, A. Chirani et al., Model-Free Control of Shape Memory Alloys Antagonistic Actuators, 17th IFAC World Congress, 2008.
DOI : 10.3182/20080706-5-KR-1001.00752

P. Gédouin, C. Join, E. Delaleau, J. Bourgeot, A. Chirani et al., A new control strategy for shape memory alloys actuators, ESOMAT 2009, 8th European Symposium on Martensitic Transformations, 2009.
DOI : 10.1051/esomat/200907007

I. Gyöngy and D. D. Clarke, On the automatic tuning and adaptation of PID controllers, Control Engineering Practice, vol.14, issue.2, pp.149-163, 2006.
DOI : 10.1016/j.conengprac.2005.01.007

V. Hagenmeyer and E. Delaleau, Exact feedforward linearization based on differential flatness, International Journal of Control, vol.2, issue.6, pp.537-556, 2003.
DOI : 10.1080/00207178408933297

V. Hagenmeyer and E. Delaleau, Robustness analysis of exact feedforward linearization based on differential flatness, Automatica, vol.39, issue.11, pp.1941-1946, 2003.
DOI : 10.1016/S0005-1098(03)00215-2

V. Hagenmeyer and E. Delaleau, Continuous-time non-linear flatnessbased predictive control: an exact feedforward linearisation setting with an induction drive example, Internat. J. Control, issue.10, pp.81-1645, 2008.

V. Hagenmeyer and E. Delaleau, Robustness Analysis With Respect to Exogenous Perturbations for Flatness-Based Exact Feedforward Linearization, IEEE Transactions on Automatic Control, vol.55, issue.3, pp.727-731, 2010.
DOI : 10.1109/TAC.2010.2040425

J. Han, From PID to Active Disturbance Rejection Control, IEEE Transactions on Industrial Electronics, vol.56, issue.3, pp.900-906, 2009.
DOI : 10.1109/TIE.2008.2011621

P. Jänker, F. Claeyssen, B. Grohmann, M. Christmann, T. Lorkowski et al., New actuators for aircraft and space applications, 11th International Conference on New Actuators, 2008.

J. Jayender, R. Patel, S. Nikumb, and M. Ostojic, H? loop shaping controller for shape memory alloy actuators, Proceedings of 43, 2005.

C. Join, J. Masse, and M. Fliess, Commande sans modèle pour l'alimentation de moteurs : résultats préliminaires et comparaisons, 2006.

C. Join, J. Masse, and M. Fliess, Etude pr??liminaire d'une commande sans mod??le pour papillon de moteur, Journal Europ??en des Syst??mes Automatis??s, vol.42, issue.2-3, pp.337-354, 2008.
DOI : 10.3166/jesa.42.337-354

A. Khodabakhshian and M. Edrisi, A new robust PID load frequency controller, Control Engineering Practice, vol.16, issue.9, pp.1069-1080, 2008.
DOI : 10.1016/j.conengprac.2007.12.003

M. Kohl, B. Krevet, and E. Just, Sma microgripper system, Sens. Actuators A Phys, pp.97-98, 2002.

S. Leclerc and C. Lexcellent, A general macroscopic description of the thermomechanical behavior of shape memory alloys, Journal of the Mechanics and Physics of Solids, vol.44, issue.6, pp.953-980, 1996.
DOI : 10.1016/0022-5096(96)00013-0

J. Lévine, Analysis and Control of Nonlinear Control Systems: A Flatness-based Approach, 2009.

D. R. Madill and D. Wang, Modeling and L/sub 2/-stability of a shape memory alloy position control system, IEEE Transactions on Control Systems Technology, vol.6, issue.4, pp.473-481, 1998.
DOI : 10.1109/87.701339

S. Majima, K. Kodama, and T. Hasegawa, Modeling of shape memory alloy actuator and tracking control system with the model, IEEE Transactions on Control Systems Technology, vol.9, issue.1, pp.54-59, 2001.
DOI : 10.1109/87.896745

M. Mboup, C. Join, and M. Fliess, A revised look at numerical differentiation with an application to nonlinear feedback control, 2007 Mediterranean Conference on Control & Automation, 2007.
DOI : 10.1109/MED.2007.4433728
URL : https://hal.archives-ouvertes.fr/inria-00142588

M. Mboup, C. Join, and M. Fliess, Numerical differentiation with annihilators in noisy environment, Numerical Algorithms, vol.14, issue.12, pp.439-467, 2008.
DOI : 10.1007/s11075-008-9236-1
URL : https://hal.archives-ouvertes.fr/inria-00319240

J. Mikusi´nskimikusi´nski, Operational calculus, p.45, 1983.

O. Dwyer and A. , Handbook of PI and PID controller tuning rules, 2006.

H. Panagopoulos, K. J. Aström, and T. Hägglund, Design of PID controllers based on constrained optimisation, IEE Proceedings - Control Theory and Applications, vol.149, issue.1, pp.32-40, 2002.
DOI : 10.1049/ip-cta:20020102

E. Patoor, A. Eberhardt, and M. Berveiller, Micromechanical modelling of the shape memory behavior. Mechanics of phase transformation and shape memory alloys 189, pp.23-37, 1994.

J. Peirs, D. Reynaerts, and H. Van-brussel, A retrospective evolution of a sma microactuation, Proceedings of The International conference on new actuator, pp.77-80, 2002.

V. Ram, T. Xiaobo, P. S. , and K. , Approximate inversion of the Preisach hysteresis operator with application to control of smart actuators, 2005.

C. Ru, L. Chen, B. Shao, W. Rong, and L. Sun, A hysteresis compensation method of piezoelectric actuator: Model, identification and control, Control Engineering Practice, vol.17, issue.9, 2009.
DOI : 10.1016/j.conengprac.2009.04.013

E. Shameli, A. Alasty, and H. Salaarieh, Stability analysis and nonlinear control of a miniature shape memory alloy actuator for precise applications, Mechatronics, vol.15, issue.4, pp.471-486, 2005.
DOI : 10.1016/j.mechatronics.2004.10.001

H. Sira-ramírez and S. K. Agrawal, Differentially Flat Systems, 2004.

?. Sittner, P. Vokoun, D. Dayananda, G. N. Stalmans, and R. , Recovery stress generation in shape memory Ti50Ni45Cu5 thin wires, Materials Science and Engineering: A, vol.286, issue.2, pp.298-311, 2000.
DOI : 10.1016/S0921-5093(00)00816-9

G. Song, V. Chaudhry, and C. Batur, Precision tracking control of shape memory alloy actuators using neural networks and sliding mode based robust controller. Smart materials and structures 12, pp.223-231, 2003.

X. Tan and J. S. Baras, Modeling and control of hysteresis in magnetostrictive actuators, Automatica, vol.40, issue.9, pp.1469-1480, 2004.
DOI : 10.1016/j.automatica.2004.04.006

S. Tavakoli, I. Griffin, and P. J. Fleming, Tuning of decentralised PI (PID) controllers for TITO processes, Control Engineering Practice, vol.14, issue.9, pp.1069-1080, 2006.
DOI : 10.1016/j.conengprac.2005.06.006

A. Visioli, Design and tuning of a ratio controller, Control Engineering Practice, vol.13, issue.4, pp.485-497, 2005.
DOI : 10.1016/j.conengprac.2004.04.010

A. Visioli, Practical PID Control Advances in Industrial Control, 2006.

Q. Wang and C. Su, Robust adaptive control of a class of nonlinear systems including actuator hysteresis with Prandtl???Ishlinskii presentations, Automatica, vol.42, issue.5, pp.859-867, 2006.
DOI : 10.1016/j.automatica.2006.01.018

J. Zehetner, J. Reger, and M. Horn, A Derivative Estimation Toolbox based on Algebraic Methods -Theory and Practice Singapore, Multiconference on Systems and Control, 2007.