;. Bibliographie, . Sematech, T. X. Austin, and U. , Fraunhofer EMFT Signs Agreement to Implement ZiBond and DBI Technologies in MEMS Applications, Rapport technique, 2007.

, Bollig & Kemper signs license agreement, Pigment & Resin Technology, vol.37, issue.3, 2008.

M. O. Aboelfotoh, A. Cros, B. G. Svensson, and K. N. Tu, Schottky-barrier behavior of copper and copper silicide onn-type andp-type silicon, Physical Review B, vol.41, issue.14, pp.9819-9827, 1990.

, Solutions to current crowding in circular vias for contact resistance measurements, Journal of Applied Physics, vol.70, issue.1, pp.253-258, 1991.

, Interfacial adhesion of copper-low k interconnects, Proceedings of the IEEE 2001 International Interconnect Technology Conference (Cat. No.01EX461), pp.257-259, 2001.

, Microstructure and electromigration in copper damascene lines, IEEE International Reliability Physics Symposium Proceedings. 37th Annual (Cat. No.99CH36296), pp.263-269, 1999.

P. ;. Et-de, P. W. Atkins, and J. Et-de-paula, Atkins' physical chemistry, 2006.

P. Baker, Preparation and properties of tantalum thin films, Thin Solid Films, vol.14, issue.1, pp.3-25, 1972.

R. W. Balluffi and B. H. Alexander, Development of Porosity during Diffusion in Substitutional Solid Solutions, Journal of Applied Physics, vol.23, issue.11, pp.1237-1244, 1952.

S. Banthia, S. Sengupta, M. Mallik, S. Das, and K. Das, Substrate effect on electrodeposited copper morphology and crystal shapes, Surface Engineering, vol.34, issue.6, pp.485-492, 2017.

;. White, D. F. Barbe, and M. H. White, A tradeoff analysis for CCD area imagers : front illuminated interline transfer vs. backslide illuminated frame transfer, CCD Applications Conference, pp.13-20, 1973.

R. S. Barnes-;-barnes, Effects associated with the Flow of Vacancies in Intermetallic Diffusion, Proceedings of the Physical Society. Section B, vol.65, issue.7, pp.512-525, 1952.

J. Baron, Market and supply chain analysis fo CMOS image sensor technologies, 2011.

F. Baudin-;-baudin, Contribution à l'étude des phénomènes mis en jeu par le collage direct à basse température de couches métalliques et oxydes métalliques, 2014.

Y. Beilliard-;-beilliard and . Beilliard, Etude de l'integration du collage direct Cuivre-Oxyde pour l'élaboration d'une architecture 3D-SiC, 2014 International 3D Systems Integration Conference (3DIC), vol.55, pp.473-479, 2007.

, Scalable, sub 2m pitch, cu/sicn to cu/sicn hybrid wafer-to-wafer bonding technology, 2017 IEEE International Electron Devices Meeting (IEDM), vol.16, pp.338-347, 1969.

I. A. Blech and C. Herring, Stress generation by electromigration, Applied Physics Letters, vol.29, issue.3, pp.131-133, 1976.

C. Bo, J. Yan-hui, L. Gong-ping, and C. Xi-meng, Atomic diffusion in annealed CU/SiO 2 /Si (100) system prepared by magnetron sputtering, Chinese Physics B, vol.19, issue.2, p.026601, 2010.

, Electromigration-Induced Plastic Deformation in Cu Interconnects : Effects on Current Density Exponent, n, and Implications for EM Reliability Assessment, Status of the CMOS Image Sensor Industry, vol.39, pp.2483-2488, 2010.

P. Cambou and J. Jaffard, Commerce et développement, Rapport Annuel, pp.122-126, 2017.

D. E. Magee-;-carlson, C. W. Magee, and . Carreau, Evolution of Cu microstructure and resistivity during thermal treatment of damascene line : Influence of line width and temperature, CRC handbook of chemistry and physics : a ready-reference book of chemical and physical data, vol.33, p.77, 1978.

, Experimental confirmation of electron fluence driven, Cu catalyzed interface breakdown model for low-k TDDB, 2012.

K. N. Chen, C. S. Tan, A. Fan, and R. Reif, Morphology and Bond Strength of Copper Wafer Bonding, Electrochemical and Solid-State Letters, vol.7, issue.1, p.G14, 2004.

L. Chen, N. Magtoto, B. Ekstrom, and J. Kelber, Effect of surface impurities on the Cu/Ta interface, Thin Solid Films, vol.376, issue.1-2, pp.115-123, 2000.

Y. Chen and J. Juang, Finite element analysis and equivalent parallel-resistance model for conductive multilayer thin films, Measurement Science and Technology, vol.27, issue.7, p.074006, 2016.

E. Chery-;-chery, Fiabilité des diélectriques low-k SiOCH poreux dans les interconnexions CMOS avancées, 2014.

F. Chiu-;-chiu, A Review on Conduction Mechanisms in Dielectric Films, Advances in Materials Science and Engineering, pp.1-18, 2014.

J. Cho, S. Yu, M. P. Roma, S. Maganty, S. Park et al., Mechanism of low-temperature copper-to-copper direct bonding for 3D TSV package interconnection, 2013 IEEE 63rd Electronic Components and Technology Conference, pp.1133-1140, 2013.

J. Cluzel, F. Mondon, D. Blachier, Y. Morand, L. Martel et al., Electrical characterization of copper penetration effects in silicon dioxide, 2002 IEEE International Reliability Physics Symposium. Proceedings. 40th Annual (Cat. No.02CH37320), pp.431-432

C. B. Collins and R. O. Carlson, Properties of Silicon Doped with Iron or Copper, Physical Review, vol.108, issue.6, pp.1409-1414, 1957.

H. Davy-;-davy, An Account of a Method of copying Paintings upon Glass, and of making Profiles by the agency of Light upon Nitrate of Silver, Journal of the Royal Institution, p.170, 1802.

B. Derby and E. R. Wallach, Theoretical model for diffusion bonding, Metal Science, vol.16, issue.1, pp.49-56, 1982.

L. Di-cioccio, F. Baudin, P. Gergaud, V. Delaye, P. Jouneau et al., Modeling and Integration Phenomena of metal-metal direct bonding technology, ECS Transactions, vol.64, issue.5, pp.339-355, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02016543

. Di-cioccio, 3d technologies at CEA-leti minatec, 4 th International Conference and Exhibition on Device Packaging, IMAPS, pp.318-324, 2008.

L. Di-cioccio, P. Gueguen, R. Taibi, D. Landru, G. Gaudin et al., An Overview of Patterned Metal/Dielectric Surface Bonding: Mechanism, Alignment and Characterization, Journal of The Electrochemical Society, vol.158, issue.6, p.P81, 2011.

L. Doyen, Caractérisation électrique de l'endommagement par électromigration des interconnexions en cuivre pour les technologies avancées de la microélectronique, 2009.

A. H. Edwards-;-edwards, Interaction of H and H 2 with the silicon dangling orbital at the 111 Si/ SiO 2 interface, Physical Review B, vol.44, issue.4, pp.1832-1838, 1991.

P. Enquist, High Density Direct Bond Interconnect (DBI) Technology for Three Dimensional Integrated Circuit Applications, MRS Proceedings, vol.970, pp.13-24, 2006.

P. Enquist, Scalable direct bond technology and applications driving adoption, 2011 IEEE International 3D Systems Integration Conference (3DIC), 2011 IEEE International, pp.1-5, 2012.

R. Fontaine, Recent innovations in CMOS image sensors, 2011 IEEE/SEMI Advanced Semiconductor Manufacturing Conference, pp.6-12, 2011.

E. Fossum, Active pixel sensor with intra-pixel charge transfer, 1994.

F. Fournel, L. Continni, C. Morales, J. Da-fonseca, H. Moriceau et al., Measurement of bonding energy in an anhydrous nitrogen atmosphere and its application to silicon direct bonding technology, Journal of Applied Physics, vol.111, issue.10, p.104907, 2012.

P. E. Garrou, P. Ramm, and M. Koyanagi, 3D IC Integration Since 2008, Handbook of 3D Integration, pp.1-12, 2014.

C. Gattinoni and A. Michaelides, Atomistic details of oxide surfaces and surface oxidation: the example of copper and its oxides, Surface Science Reports, vol.70, issue.3, pp.424-447, 2015.

P. Gondcharton, Intégration du collage direct : couches minces métalliques et évolutions morphologiques, 2015.

R. Gonella, P. Motte, and J. Torres, Time-dependent-dielectric breakdown used to assess copper contamination impact on inter-level dielectric reliability, 2000 IEEE International Integrated Reliability Workshop Final Report (Cat. No.00TH8515), pp.189-190

M. A. Green and M. J. Keevers, Optical properties of intrinsic silicon at 300 K, Progress in Photovoltaics: Research and Applications, vol.3, issue.3, pp.189-192, 1995.

A. A. Griffith-;-griffith, VI. The phenomena of rupture and flow in solids, Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character, vol.221, issue.582-593, pp.163-198, 1921.

A. S. Grove-;-grove, U. Gösele, and Q. Tong, Physics and technology of semiconductor devices, SEMICONDUCTOR WAFER BONDING, vol.28, pp.215-241, 1967.

P. Gueguen, L. Di-cioccio, P. Gergaud, M. Rivoire, D. Scevola et al., Copper Direct-Bonding Characterization and Its Interests for 3D Integration, Journal of The Electrochemical Society, vol.156, issue.10, p.H772, 2009.

P. Gueguen, C. Ventosa, L. D. Cioccio, H. Moriceau, F. Grossi et al., Physics of direct bonding: Applications to 3D heterogeneous or monolithic integration, Microelectronic Engineering, vol.87, issue.3, pp.477-484, 2010.

J. Guillaumont, Après la mort de Tullia : parole et silence, Les écritures de la douleur dans l?épistolaire de l?Antiquité à nos jours, pp.275-289

D. Gupta, K. Vieregge, and K. V. Srikrishnan, Copper diffusion in amorphous thin films of 4% phosphorus?silcate glass and hydrogenated silicon nitride, Applied Physics Letters, vol.61, issue.18, pp.2178-2180, 1992.

J. Haisma, G. A. Spierings, T. M. Michielsen, and C. L. Adema, Surface preparation and phenomenological aspects of direct bonding, Philips Journal of Research, vol.49, issue.1-2, pp.23-46, 1995.

T. Haruta, T. Nakajima, J. Hashizume, T. Umebayashi, H. Takahashi et al., 4.6 A 1/2.3inch 20Mpixel 3-layer stacked CMOS Image Sensor with DRAM, 2017 IEEE International Solid-State Circuits Conference (ISSCC), pp.76-77, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01619243

;. Hau-riege and C. S. Hau-riege, An introduction to Cu electromigration, Microelectronics Reliability, vol.44, issue.2, pp.195-205, 2004.

M. He and T. Lu, Experimental Techniques, Metal-Dielectric Interfaces in Gigascale Electronics, pp.23-44, 2011.

R. He, M. Fujino, A. Yamauchi, Y. Wang, and T. Suga, Combined Surface Activated Bonding Technique for Low-Temperature Cu/Dielectric Hybrid Bonding, ECS Journal of Solid State Science and Technology, vol.5, issue.7, pp.P419-P424, 2016.

C. Hsu, . Wen-chin-lin, . Teng-chun-tsai, C. Huang, and J. Wu, A model for post-CMP cleaning effect on TDDB, 2011 International Reliability Physics Symposium, 2011.

C. Hu, L. Gignac, B. Baker, E. Liniger, R. Yu et al., Impact of Cu microstructure on electromigration reliability, 2007 IEEE International Interconnect Technology Conferencee, pp.93-95, 2007.

C. Hu, L. Gignac, E. Liniger, B. Herbst, D. L. Rath et al., Comparison of Cu electromigration lifetime in Cu interconnects coated with various caps, Applied Physics Letters, vol.83, issue.5, pp.869-871, 2003.

C. Hu, L. G. Gignac, J. Ohm, C. M. Breslin, E. Huang et al., Microstructure, impurity and metal cap effects on Cu electromigration, AIP Conference Proceedings, vol.1601, issue.1, pp.67-78, 2014.

C. Hu, L. Gignac, and R. Rosenberg, Electromigration of Cu/low dielectric constant interconnects, Microelectronics Reliability, vol.46, issue.2-4, pp.213-231, 2006.

G. Irwin-;-irwin, Fracture Dynamics : Fracturing of Metals, pp.147-166, 1948.

J. Jaffard, 3D Stacking of RAM-Processor Chips Using TSV, Vertical 3D Memory Technologies, pp.275-344, 2014.

[. Standard, JEDEC, JEDEC (formerly the GaAs REL Workshop) ROCS Workshop, 2004., 2004.

[. Johnson, Surface energy and the contact of elastic solids, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences, vol.324, issue.1558, pp.301-313, 1971.

J. Jourdon, S. Lhostis, S. Moreau, N. Bresson, P. Salome et al., Evaluation of Hybrid Bonding Interface Quality by Contact Resistivity Measurement, IEEE Transactions on Electron Devices, vol.66, issue.6, pp.2699-2703, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02118046

J. Jourdon, S. Lhostis, S. Moreau, J. Chossat, M. Arnoux et al., Hybrid bonding for 3D stacked image sensors: impact of pitch shrinkage on interconnect robustness, 2018 IEEE International Electron Devices Meeting (IEDM), 2018.
URL : https://hal.archives-ouvertes.fr/hal-02517231

J. Jourdon, S. Moreau, D. Bouchu, S. Lhostis, N. Bresson et al., Effect of passivation annealing on the electromigration properties of hybrid bonding stack, 2017 IEEE International Reliability Physics Symposium (IRPS), 2017.
URL : https://hal.archives-ouvertes.fr/hal-01552793

A. Jouve, V. Balan, N. Bresson, C. Euvrard-colnat, F. Fournel et al., 1?m Pitch direct hybrid bonding with <300nm wafer-to-wafer overlay accuracy, 2017 IEEE SOI-3D-Subthreshold Microelectronics Technology Unified Conference (S3S), 2017.

A. E. Kaloyeros and E. Eisenbraun, Ultrathin Diffusion Barriers/Liners for Gigascale Copper Metallization, Annual Review of Materials Science, vol.30, issue.1, pp.363-385, 2000.

K. Kim, Y. Joo, K. Kim, and J. Kwon, Extraction of Cu diffusivities in dielectric materials by numerical calculation and capacitance-voltage measurement, Journal of Applied Physics, vol.100, issue.6, p.063517, 2006.

, A 30 GSample/s InP/CMOS sample-hold amplifier with active droop correction, 2016.

, Permanent wafer bonding in the low temperature by using various plasma enhanced chemical vapour deposition dielectrics, Chipworks Reverse Engineers Omnivision 1.4um BSI Sensor, vol.70, p.172, 1991.

V. Koifman-;-koifman, (Invited) High Accuracy Aligned Wafer Bonding for Wafer-Level Integration, ECS Meeting Abstracts, 2018.

S. Konishi, M. Moriyama, and M. Murakami, Effect of Annealing Atmosphere on Void Formation in Copper Interconnects, MATERIALS TRANSACTIONS, vol.43, issue.7, pp.1624-1628, 2002.

R. Lahoz, J. P. Espinós, F. Yubero, A. R. González-elipe, and G. F. De-la-fuente, ?In situ? XPS studies of laser-induced surface nitridation and oxidation of tantalum, Journal of Materials Research, vol.30, issue.19, pp.2967-2976, 2015.

, Relationship between interfacial adhesion and electromigration in Cu metallization, Journal of Applied Physics, vol.93, issue.3, pp.1417-1421, 2003.

, Composition of natural oxide films on polycrystalline tantalum using XPS electron take-off angle experiments, Surface and Interface Analysis, vol.18, issue.4, pp.257-261, 1992.

, Reliable 300 mm wafer level hybrid bonding for 3d stacked cmos image sensors, 2016 IEEE 66th Electronic Components and Technology Conference (ECTC), pp.869-876, 2016.

B. Li, T. D. Sullivan, T. C. Lee, and D. Badami, Reliability challenges for copper interconnects, Microelectronics Reliability, vol.44, issue.3, pp.365-380, 2004.

Z. Li, R. G. Gordon, D. B. Farmer, Y. Lin, and J. Vlassak, Nucleation and Adhesion of ALD Copper on Cobalt Adhesion Layers and Tungsten Nitride Diffusion Barriers, Electrochemical and Solid-State Letters, vol.8, issue.7, p.G182, 2005.

M. H. Lin, Y. L. Lin, K. P. Chang, K. C. Su, and T. Wang, Copper interconnect electromigration behaviors in various structures and lifetime improvement by cap/dielectric interface treatment, Microelectronics Reliability, vol.45, issue.7-8, pp.1061-1078, 2005.

J. R. Lloyd, C. E. Murray, S. Ponoth, S. Cohen, and E. Liniger, The effect of Cu diffusion on the TDDB behavior in a low-k interlevel dielectrics, Microelectronics Reliability, vol.46, issue.9-11, pp.1643-1647, 2006.

A. L. Loke, . Changsup-ryu, C. P. Yue, J. S. Cho, and S. S. Wong, Kinetics of copper drift in PECVD dielectrics, IEEE Electron Device Letters, vol.17, issue.12, pp.549-551, 1996.

J. W. Lyding, K. Hess, and I. C. Kizilyalli, Reduction of hot electron degradation in metal oxide semiconductor transistors by deuterium processing, Applied Physics Letters, vol.68, issue.18, pp.2526-2528, 1996.

R. I. Made, . Peng-lan, H. Y. Li, C. L. Gan, and C. S. Tan, Study of the evolution of Cu-Cu bonding interface imperfection under direct current stressing for three dimensional integrated circuits, 2011 IEEE International Interconnect Technology Conference, pp.1-3, 2011.

M. Martinez, M. Legros, T. Signamarcheix, L. Bally, S. Verrun et al., Mechanisms of copper direct bonding observed by in-situ and quantitative transmission electron microscopy, Thin Solid Films, vol.530, pp.96-99, 2013.

W. P. Maszara, G. Goetz, A. Caviglia, and J. B. Mckitterick, Bonding of silicon wafers for silicon?on?insulator, Journal of Applied Physics, vol.64, issue.10, pp.4943-4950, 1988.

J. D. Mcbrayer, R. M. Swanson, and T. W. Sigmon, Diffusion of Metals in Silicon Dioxide, Journal of The Electrochemical Society, vol.133, issue.6, pp.1242-1246, 1986.

H. Mehrer-;-mehrer, L. De-springer-;-millet, M. Vigier, G. Sicard, W. Uhring et al., A 5 Million Frames Per Second 3d Stacked Image Sensor With In-Pixel Digital Storage, ESSCIRC 2018 -IEEE 44th European Solid State Circuits Conference (ESSCIRC), vol.155, pp.62-65, 2007.

N. R. Moody, S. K. Venkataraman, B. Bastasz, J. E. Angelo, and W. W. Gerberich, Hydrogen Effects on the Fracture of Thin Tantalum Nitride Films, MRS Proceedings, vol.356, p.356, 1994.

, Mass transport-induced failure in direct copper (Cu) bonding interconnects for 3-D integration, IEEE International Reliability Physics Symposium, 2014.

S. Moreau, D. Bouchu, V. Balan, A. Berrigo, A. Jouve et al., Mass Transport-Induced Failure of Hybrid Bonding-Based Integration for Advanced Image Sensor Applications, 2016 IEEE 66th Electronic Components and Technology Conference (ECTC), pp.1940-1945, 2016.

S. Myers, J. Lin, R. M. Souza, W. D. Sproul, and J. J. Moore, The ? to ? phase transition of tantalum coatings deposited by modulated pulsed power magnetron sputtering, Surface and Coatings Technology, vol.214, pp.38-45, 2013.

R. S. Nelson, D. J. Mazey, and R. S. Barnes, The thermal equilibrium shape and size of holes in solids, Philosophical Magazine, vol.11, issue.109, pp.91-111, 1965.

E. Orowan, Fracture and strength of solids, Reports on Progress in Physics, vol.12, issue.1, pp.185-232, 1949.

J. W. Noble-;-p and . Noble, Self-scanned silicon image detector arrays, IEEE Transactions on Electron Devices, vol.15, issue.4, pp.202-209, 1968.

, High-temperature conduction behaviors of HfO2/TaN-based metalinsulator-metal capacitors, Journal of Applied Physics, vol.102, issue.7, p.73706, 2005.

I. Perez, V. Sosa, F. Gamboa, J. T. Elizalde-galindo, J. L. Enríquez-carrejo et al., Influence of post-deposition annealing on the chemical states of crystalline tantalum pentoxide films, Applied Physics A, vol.124, issue.11, 2018.

A. Plöbl-;-plöbl, Wafer direct bonding : tailoring adhesion between brittle materials, Materials Science and Engineering : R : Reports, vol.25, issue.1-2, pp.1-88, 1999.

S. J. Proctor and L. W. Linholm, A direct measurement of interfacial contact resistance, IEEE Electron Device Letters, vol.3, issue.10, pp.294-296, 1982.

J. A. Pryde and I. S. Tsong, A theory of the resistivity of high-concentration interstitial alloys with application to the tantalum-hydrogen and tantalum-deuterium systems, Acta Metallurgica, vol.19, issue.12, pp.1333-1338, 1971.

I. Radu, D. Landru, G. Gaudin, G. Riou, C. Tempesta et al., Recent developments of Cu-Cu non-thermo compression bonding for wafer-to-wafer 3D stacking, 2010 IEEE International 3D Systems Integration Conference (3DIC), pp.1-6, 2010.

D. A. Ramappa and W. B. Henley, Effects of Copper Contamination in Silicon on Thin Oxide Breakdown, Journal of The Electrochemical Society, vol.146, issue.6, pp.2258-2260, 1999.

[. Ramm, Handbook of Wafer Bonding, 2012.

B. Rebhan, J. Svoboda, and M. Panholzer, A thermodynamic study of voiding phenomena in Cu?Cu thermo-compression wafer bonding, Microsystem Technologies, vol.24, issue.1, pp.815-822, 2017.

. Rhodes, The Mass Production of BSI CMOS Image Sensors, 2009.

F. Rieutord, J. Eymery, F. Fournel, D. Buttard, R. Oeser et al., High-energy x-ray reflectivity of buried interfaces created by wafer bonding, Physical Review B, vol.63, issue.12, 2001.

F. Rieutord, H. Moriceau, R. Beneyton, L. Capello, C. Morales et al., Rough Surface Adhesion Mechanisms for Wafer Bonding, ECS Transactions, vol.3, issue.6, pp.205-215, 2019.

J. Rode, HgCdTe hybrid focal plane, Infrared Physics, vol.24, issue.5, pp.443-453, 1984.

C. Sart-;-sart, Étude expérimentale et numérique des contraintes mécaniques dans les architectures tridimensionnelles sur silicium pour les applications d'imagerie, 2019.

C. Sart, R. Estevez, V. Fiori, S. Lhostis, E. Deloffre et al., Cu/SiO<inf>2</inf> hybrid bonding: Finite element modeling and experimental characterization, 2016 6th Electronic System-Integration Technology Conference (ESTC), pp.1-7, 2016.

[. Sart, Experimental and numerical investigations on Cu/low-k interconnect reliability during copper pillar shear test, IEEE Transactions on Electron Devices, vol.48, issue.2, pp.377-385, 2001.

Y. Shacham-diamand-;-shacham-diamand, Copper Transport in Thermal SiO2, Journal of The Electrochemical Society, vol.140, issue.8, p.2427, 1993.

A. A. Shirzadi, H. Assadi, and E. R. Wallach, Interface evolution and bond strength when diffusion bonding materials with stable oxide films, Surface and Interface Analysis, vol.31, issue.7, pp.609-618, 2001.

S. R. Shortes, W. W. Chan, W. C. Rhines, J. B. Barton, and D. R. Collins, Development of a thinned, backside-illuminated charge-coupled device imager, 1973 International Electron Devices Meeting, pp.415-415, 1973.

R. Stengl, T. Tan, and U. Gösele, A Model for the Silicon Wafer Bonding Process, Japanese Journal of Applied Physics, vol.28, issue.Part 1, No. 10, pp.1735-1741, 1989.

S. Sukegawa, T. Umebayashi, T. Nakajima, H. Kawanobe, K. Koseki et al., A 1/4-inch 8Mpixel back-illuminated stacked CMOS image sensor, 2013 IEEE International Solid-State Circuits Conference Digest of Technical Papers, pp.484-485, 2013.

R. Taibi, L. Di-cioccio, C. Chappaz, M. Francou, J. Dechamp et al., Investigation of stress induced voiding and electromigration phenomena on direct copper bonding interconnects for 3D integration, 2011 International Electron Devices Meeting, 2011.

R. Taibi, Ouverture du secteur de l'électricité en tant qu'indicateur de l'intégration du marché de l'électricité et des interconnexions, 2012.

R. Taibi, L. Di-cioccio, C. Chappaz, L. Chapelon, P. Gueguen et al., Full characterization of Cu/Cu direct bonding for 3D integration, 2010 Proceedings 60th Electronic Components and Technology Conference (ECTC), pp.219-225, 2010.

H. Takagi, K. Kikuchi, R. Maeda, T. R. Chung, and T. Suga, Surface activated bonding of silicon wafers at room temperature, Applied Physics Letters, vol.68, issue.16, pp.2222-2224, 1996.

[. Takeuchi, , 2005.

H. Takeuchi, A. Wung, X. Sun, R. T. Howe, and T. King, Thermal Budget Limits of Quarter-Micrometer Foundry CMOS for Post-Processing MEMS Devices, IEEE Transactions on Electron Devices, vol.52, issue.9, pp.2081-2086, 2005.

N. Tokuda, T. Kanda, S. Yamasaki, K. Miki, and K. Yamabe, Leakage Current Distribution of Cu-Contaminated Thin SiO2, Japanese Journal of Applied Physics, vol.42, issue.Part 2, No. 2B, pp.L160-L162, 2003.

M. Tompsett, Q. Tong, and U. Et-gösele, Semiconductor wafer bonding : science and technology. The Electrochemical Society series, 1971.

C. H. Tsau, S. M. Spearing, and M. A. Schmidt, Characterization of Wafer-Level Thermocompression Bonds, Journal of Microelectromechanical Systems, vol.13, issue.6, pp.963-971, 2004.

K. T. Turner, A. A. Ayon, D. Choi, B. Miller, and S. M. Spearing, Characterization of Silicon Fusion Bonds Using a Four-Point Bend Specimen, MRS Proceedings, vol.657, p.657, 2000.

N. T?yama-;-t?yama, Copper impurity levels in silicon, Solid-State Electronics, vol.26, issue.1, pp.37-46, 1983.

O. Van-der-straten, X. Zhang, K. Motoyama, C. Penny, J. Maniscalco et al., ALD and PVD Tantalum Nitride Barrier Resistivity and Their Significance in via Resistance Trends, ECS Transactions, vol.64, issue.9, pp.117-122, 2014.

C. Ventosa, C. Morales, L. Libralesso, F. Fournel, A. M. Papon et al., Mechanism of Thermal Silicon Oxide Direct Wafer Bonding, Electrochemical and Solid-State Letters, vol.12, issue.10, p.H373, 2009.

C. Ventosa, F. Rieutord, L. Libralesso, C. Morales, F. Fournel et al., Hydrophilic low-temperature direct wafer bonding, Journal of Applied Physics, vol.104, issue.12, p.123524, 2008.

C. E. Viana, A. N. Silva, N. I. Morimoto, and O. Bonnaud, Analysis of SiO2 Thin Films Deposited by PECVD Using an Oxygen-TEOS-Argon Mixture, Brazilian Journal of Physics, vol.31, issue.2, pp.299-303, 2001.

M. Vilmay, D. Roy, S. Blonkowski, F. Volpi, and J. Chaix, Capacitance variation under electrical stress of SiOCH low-k dielectrics for the advanced 45nm technology node and beyond, 2009 IEEE International Integrated Reliability Workshop Final Report, pp.106-110, 2009.

R. Fintel-;-von-fintel, Modern CMOS Cameras as Replacements for CCD Cameras, 2015.

W. S. Boyle and G. E. Smith, Charge Coupled Semiconductor Devices, Bell System Technical Journal, vol.49, issue.4, pp.587-593, 1970.

K. Watanabe and Y. Fukai, Electrical resistivity due to interstitial hydrogen and deuterium in V, Nb, Ta and Pd, Journal of Physics F: Metal Physics, vol.10, issue.8, pp.1795-1801, 1980.

B. G. Willis and D. V. Lang, Oxidation mechanism of ionic transport of copper in SiO2 dielectrics, Thin Solid Films, vol.467, issue.1-2, pp.284-293, 2004.

K. Yamakawa, K. Nunogaki, and F. Eiichi-fujita, Isotope Effect in Hydrogen Diffusion in Copper, Journal of the Physical Society of Japan, vol.55, issue.3, pp.877-884, 1986.

R. Yarema, G. Deptuch, J. Hoff, F. Khalid, R. Lipton et al., Vertically integrated circuit development at Fermilab for detectors, Journal of Instrumentation, vol.8, issue.01, pp.C01052-C01052, 2013.

Y. Zhu, K. Mimura, and M. Isshiki, Oxidation Mechanism of Copper at 623-1073 K, MATERIALS TRANSACTIONS, vol.43, issue.9, pp.2173-2176, 2002.